0S Rectangle Tab (Opening Palette Dialog) - Intergraph Smart 3D - Help

Intergraph Smart 3D Molded Forms

Language
English
Product
Intergraph Smart 3D
Subproduct
Molded Forms
Search by Category
Help
Smart 3D Version
12.1 (2019)

The following advanced opening macros allow you to place rectangular openings with no supports. The software positions a no-support opening by X-, Y-, and Z-coordinates. The default position is the center of the plate.

0S Rectangle HxWxR

Creates a rounded rectangular opening with no supports. You can define the length, the width, and the corner radius. See Rectangular Opening with No Supports.

0S Rectangle 400x300x100

Creates a rounded rectangular opening with no supports. The length is fixed at 400 mm, the width is fixed at 300 mm, and the corner radius is fixed at 100 mm. See Rectangular Opening with No Supports, a 400 mm Length, and a 300 mm Width.

0S Rectangle 600x500x200

Creates a rounded rectangular opening with no supports. The length is fixed at 600 mm, the width is fixed at 500 mm, and the corner radius is fixed at 200 mm. See Rectangular Opening with No Supports, a 600 mm Length, and a 500 mm Width.

0S Rectangle 1350x700x150

Creates a rounded rectangular opening with no supports. The length is fixed at 1350 mm, the width is fixed at 700 mm, and the corner radius is fixed at 150 mm. See Rectangular Opening with No Supports, a 1350 mm Length, and a 700 mm Width.