The software does not support splitting the logical connection between a profile
and a plate.
-
Click Select
on the vertical toolbar.
-
Select Connections in the Locate Filter.
-
Select the logical connection to modify and to display the Edit Intersection Ribbon.
-
If you need to split the logical connection into more than one region, click Define Region
.
-
Select one or more grid planes, plate systems, profile landing curves, or seams that intersect the logical connection.
-
Click Select and Edit Region
.
A red circle
appears at each region boundary.
-
Select a region to modify.
A red arrow
appears in the plane of the continuous system.
-
If needed, click Invert.
The red arrow moves to the other system, which is now continuous for the selected region.
You can also right-click the logical connection in a graphic view or in the Workspace Explorer and click Invert from the short-cut menu.
If the logical connection to be inverted has only one region, the region is automatically
selected for the invert operation.
-
If needed, type a value for Offset.
-
Click Finish.
Invert and Offset changes made to the logical connection are not visible in a graphic view until the
systems have been detailed in the Structural Detailing task.