Conduit Stock - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Electrical Reference Data

Language
English
Product
Intergraph Smart 3D
Subproduct
Electrical
Search by Category
Reference Data
Smart 3D Version
12 (2018)

The Conduit Stock node (the sheet in the Conduit.xls workbook) defines the conduit parts that you want in your catalog.

Commodity Type

Type the conduit commodity type short description or the corresponding codelist value. Valid codes and short descriptions are listed in the AllCodeLists.xls workbook on the Piping Commodity Type sheet in the Codelist Number column.

Density

Specify the material density including the units, for example: 490lbm/ft3 or 7856kg/m3.

End Preparation[port number]

Enter the end preparation code for the part port. Valid codes are listed in the AllCodeLists.xls workbook on the End Preparation sheet in the Codelist Number column.

End Standard[port number]

Enter the end standard code for the part port. Valid codes are listed in the AllCodeLists.xls workbook on the End Standard sheet in the Codelist Number column.

First Size Schedule

Specify the schedule (or thickness) for the first size end of this conduit commodity. This data is only required when the commodity code does not include schedule. Valid codes and short descriptions are listed in the AllCodeLists.xls workbook on the Schedule Thickness sheet in the Codelist Number and Schedule Thickness Short Description columns.

If the code for the schedule represents a thickness value, the units of measure for the wall thickness may differ from the units of measure for the nominal diameter.

Graphical Representation Or Not

Specify whether the part should appear in the model.

Industry Commodity Code

Type a commodity code for the conduit part. The software uses this commodity code to find the conduit in the parts catalog. This code must be unique across the catalog.

Lining Material

Specify the lining material, if any, for the part. Examples of lining material include epoxy, rubber, and plastic. Valid codes are listed in the AllCodeLists.xls workbook on the Lining Material sheet in the Codelist Number column.

Material Grade

Specify the material grade for the part. Valid codes are listed in the AllCodeLists.xls workbook on the Material Grade sheet in the Codelist Number column.

NPD[port number]

Type the nominal diameter for the end. If both ends have the same NPD, you still must enter the same NPD value in both the NPD[1] and NPD[2] columns.

NPD Unit Type[port number]

Specify the units for the NPD column. For example, type mm or in.

Purchase Length

Specify the length in which the conduit can be purchased including the units, for example 6m or 20ft. If you do not specify a purchase length, the software uses the Maximum Pipe Length value for the purchase length.

Schedule Thickness[port number]

Type the schedule thickness short description or code for the part port. Valid codes and short descriptions are listed in the AllCodeLists.xls workbook on the Schedule Thickness sheet in the Codelist Number and Schedule Thickness Short Description columns.

See Also

Conduit Reference Data