Check Out a License for Smart Review - Intergraph Smart Review - Installation

Intergraph Smart Review Installation

Language
English
Product
Intergraph Smart Review
Search by Category
Installation & Upgrade
Smart Review Version
13.x(2018)
  1. Make sure SmartPlant License Manager (SPLM) is set up on your computer.

  2. Click Start > Programs > Intergraph SmartPlant License Checkout Utility > License Checkout Utility.

    License Checkout Utility Dialog Box

  3. In the Application Group list, select your product.

  4. In the Available Modules list, select the module to use.

If required, select an expiration from the License Expiration list, and then click Check Out. The minimum length of time you can have a license checked out is for approximately 24 hours. You can cut this time down to approximately 12 hours if you check out the license just before mid-day. For product-specific check out information, refer to the installation guide provided with your product.A license can be checked out for a maximum of 90 days. To check out only the base Smart Review product, do not check any of the modules.

  • This version of Smart Review requires the most current version of the SmartPlant License Checkout Utility. Although you can have an older version of the Checkout Utility installed on your system, you must load and run the latest version with Smart Review. If you attempt to use an older Checkout Utility version with the current version of Smart Review, the utility does not detect Smart Review and does not provide options for license checkout.

  • Checked out licenses cannot be checked in. If you check out three modules (four total licenses: one base and three modules), then attempt to run the License Checkout utility again and select two other modules, the software displays a dialog box telling you that a license is already checked out for Smart Review and displaying the expiration date for that license.

    When running in remote license mode, you cannot use setup to modify the product installation until the following conditions are met:

  • The checkout duration expires.

  • The system is working with SmartPlant License Manager in connected license mode once again.

    In other words, you cannot install or remove modules while running in remote license mode.

  • If Smart Review is running in remote license mode but is unable to confirm for any reason that it is running in that mode, Smart Review automatically returns to connected license mode and attempts to obtain the licenses from SmartPlant License Manager. Smart Review notifies you if it is unable to obtain licenses from SmartPlant License Manager.

Each time you start Smart Review while using remote license mode, the software displays a message informing you when the checked out licenses expire. The first time that you run Smart Review after the checked out licenses expire, the software displays a message informing you that the checked out licenses have expired and that the software is reverting to the standard connected license mode and attempting to get licenses from SmartPlant License Manager.