These properties specify for the part selection properties and for report properties for the Strut_A. Enter these properties to select the correct part from an Assembly Information Rule (AIR) and used for Reporting purpose.
IJUAhsStroke::Stroke
Enter the stroke of the snubber. This value is used by the AIR for the part selection of the snubbers.
IJOAhsExtension::Extension
Enter the extension distance for snubbers due to thermal movement from cold to hot. This value is used to compare the travel of the snubber against the stroke of the snubber and is required for ordering.
IJOAhsRetraction::Retraction
Enter the retraction distance for snubbers due to thermal movement from cold to hot. This value is used to compare the travel of the snubber against the stroke of the snubber and is required for ordering.
IJUAhsAllowance::Allowance
Enter the excess travel allowance, for example 20%. A warning is displayed if (extension + retraction) times (one + allowance) is greater than stroke.
IJOAhsSetPosition::SetPosition
Enter the set position that is used for purchasing. This value is used for reporting.