IJUAhsIncludeBolts::IncludeBolts
Specifies whether bolts are included. Allowed values for IncludeBolts are
1- No bolts
2- Bolts for bottom plate only
3- Bolts for top plate only
4- Bolts for both top and bottom plates
Allowed values are codelisted values from the hsIncludeBolts sheet of the HS_S3Dcodelist.xls workbook.
IJUAhsPin1::Pin1Diameter
Specifies the pin diameter for all the bolts.
IJUAhsPin1::Pin1Length
Specifies the pin length for all the bolts.
IJUAOffset1::Offset1
Specifies the offset of each bolt row from the top shape.
IJUAhsMulti1::Multi1Qty
Specifies the quantity of bolts on one side of the plate. For example, when Multi1Qty is set to 2, the number of bolts on the plate are 4, 2 on each side of the plate. Bolts are not shown when Multi1Qty is set to zero.
IJUAhsMulti1::Multi1LocateBy
Specifies the location of the bolts. Each bolt can be located in two ways.
1 - Relative to center of the group
2 - Relative to edge.
The exact meaning depends on the quantity of bolts. This value can be 0 (nothing), 1 (center), or 2 (Edge).