What's New in CAESAR II - CAESAR II - Installation

The latest CAESAR II release delivers new and extended capabilities in response to current market requirements and feedback from the CAESAR II user community.

CAESAR II 2019, Version 11.00 Service Pack 1

User Interface

• Added information to let you know when you are opening a CAESAR II file created in an earlier version. Added a warning message when opening a file from an earlier version, and added the last saved version to the Open dialog box preview. (CR-TX-31736)

Equipment & Component Analysis

• Added log file data to the EN-1591 Flanges output report and revised report file names to make reports easier to identify. (CR-TX-32137)

• Added bolt torque calculations and bolt installation force to EN-1591 Flanges calculations. Also revised load case headings in the output report. (CR-TX-32139)

External Interfaces

• For Import PCF and Advanced PCF Import (APCF), changed the default value from -1 (which includes all pipe sizes) to 2 inches (which filters out piping and components under 2 inches in diameter). (CR-TX-31663)

Documentation/Help

• Added graphics to better describe flange types for EN-1591 Flanges. (CR-TX-31944)

CAESAR II 2019, Version 11.00

User Interface

• Optimized the performance of 3D model graphics, most notably with large model refresh times. Because of the improved performance, View > Toggle Graphics Update is no longer needed and has been removed. (DI-TX-23248)

• Added shortcut keys that are used consistently throughout the software. For more information, see Shortcut Keys in the CAESAR II User's Guide and the CAESAR II Quick Reference Guide. (DI-TX-24231, RI-TX-24977)

• Improved the File tab options on the main window ribbon, including improved existing options, and new folder and help access. (CR-TX-25240, DI-TX-28411)

• Removed the secondary menu from the main window. All commands are on the main window ribbon. (CR-TX-25241)

• Added a new Layout menu to the main window ribbon. The menu provides theme, language, and icon size options and allows you to reset to the default layout. (CR-TX-25239, CR-TX-26312, CR-TX-28056)

• Changed the default look of the software to a new light gray Light theme. The existing dark gray Dark theme is available on the Layout menu. (CR-TX-25776, CR-TX-28056)

• Changed some graphics defaults to better match the most commonly-used settings. New defaults include: Default Operator (Select), Hide Overlapping Text (on), Text Options (12 pt. by default), and Bottom and Top background colors (white). (DI-TX-24698)

• Updated the File > About window to improve usability and appearance. Also updated the Help and About icons to provide a look consistent with other interface improvements. (CR-TX-26044)

• Updated the Help tab to eliminate unnecessary commands, better organize the remaining commands, and provide a new help search function. (CR-TX-25242)

• Revised product branding from Intergraph to Hexagon throughout the software. (DI-TX-22927)

Piping, Equipment, and Environmental Codes

• Added support for ASCE 7-2016 wind and seismic loads. (CR-TX-23218)

• Added support for the China GB 50009-2012 wind code. (CR-TX-23229)

• Added support for the ISO 14692 2017 piping code. The software also still includes support for ISO 14692 2005. (CR-TX-25780, CR-TX-26608)

• Updated the CODETI code to the November 2016 edition, and corrected CODETI code stress equations in the Quick Reference Guide. (TR-TX-25335, TR-TX-3832)

• Updated the KHK seismic design standard to the 2012 edition. (CR-TX-26612)

• Updated the ASME B31.1 code to the July 2018 edition. (DI-TX-27783)

• Updated the BS EN 13480 code to the June 2017 edition. (DI-TX-27783)

• Added support for the DNV 2017 (DNVGL-ST-F101) piping code, including a new DNV Wall Thickness Calculator. The software also still supports for DNV 1996. New features of the calculator include:

  • Definition of global DNV properties and element-specific properties.

  • Display of material, pressures, and design loads defined in the model.

  • Output results and graphs that update as you define or change properties.

  • Ability to update the wall thickness in Piping Input.

  • Saving calculator input values to the model.

    (RI-TX-24868, TR-TX-29168)

• Updated the Errors and Warnings grid to perform more like Microsoft Excel. The grid supports selection and copy of grid rows between the grid and Excel. (DI-TX-22923)

• For the Seismic Wizard, changed the default value for the ASCE 7 Response Factor R from 12 to 3.5 to comply with ASME B31 standards. (CR-TX-23265)

• Added support for displaying all component stress values (hoop, allowable, SIF) in reports instead of only the highest component stress. (CR-TX-26265)

Material and Content

• Updated the Material Database Editor grid to support copy, cut, paste, and delete of cells and rows within the grid and between the grid and Excel. (DI-TX-22915, DI-TX-28411)

• Updated the hanger table for LISEGA spring hangers. (CR-TX-10627)

Configuration

• Updated B31.4 and B31.8 codes to function similarly for non-default configuration settings and combination load cases. (DI-TX-24014)

• Added support for Intergraph Smart® Licensing 2019.

Piping Input

• Added the CAESAR II Determines option to Allowable Stress Indicator for the B31.8 code, similar to the existing implementation for B31.4. CAESAR II Determines specifies that the software selects the stress equations based on the calculated axial load in the piping system. (CR-TX-20558)

• Added node name and node number formatting options to Options > Node Numbers. You can now display names and numbers with the same formatting available for Options > Node Name in the Static Output Processor. (CR-TX-16576)

• Updated and renamed the Global Coordinates and Global commands to View/Set Coordinates. The new Global Coordinates dialog box displays a list view of nodes and coordinates for all disconnected elements, and you can edit the values. (CR-TX-5232)

• Updated the Coordinates and Elements lists to support the new View/Set Coordinates command. The start (From) node displays in the Node column of the Coordinates list. Right-click > View/Set Coordinates displays on the Coordinates list. Disconnected element rows highlight in green in both lists. (CR-TX-24843)

• Extended the range for node numbers. A node number previously had a maximum value of 32,000. It now has a maximum value of 8 million. (CR-TX-1271, RI-TX-24353)

• Improved the efficiency of processing disconnected segments to function with the extended node number range. (CR-TX-24998)

• Improved the behavior of node names. The same node name now displays on all elements sharing the same node. (CR-TX-17148)

• Increased the maximum length of node names from 10 to 25 characters. (CR-TX-25865, RI-TX-17314)

• Increased the number of Uniform Loads from three to nine vectors. (RI-TX-24862)

• Added a restraint legend which allows you to visually identify and edit restraint gap values. (CR-TX-26518, CR-TX-27856)

• Added the Rigid Type option to the Rigids auxiliary data tab. When you define a rigid type, the software graphically displays the valve or flange rigid type in the model view. (CR-TX-1633, CR-TX-8390)

• For the ISO-14692 2005 code, allowed editing of the Pressure SIF box on the SIFs/Tees auxiliary tab. You can now change the value in both boxes from the default value of 1.3. (CR-TX-26736)

• Adjusted the density for material (191) A335 P91. (CR-TX-21550)

• Added the ability to create multiple toolbar and command profiles. You can switch between profiles as needed and share your profile view with others. Delivered a new functional profile as the default profile. (CR-TX-8772)

• Changed the display of hangers and cans. For non-vertical pipe, hangers and cans now display linearly and perpendicular to the pipe. (CR-TX- 26343)

Load Case Editor

• Added a properly formatted Microsoft Excel import file to the Static Analysis - Load Case Editor. The software also provides an example template file, LCE_Template.xltx, in the C:\\ProgramData\Intergraph CAS\CAESAR II\11.00\System\templates folder. (CR-TX-15419, CR-TX-3333)

• Added export of an Excel .xlsx file from the Static Analysis - Load Case Editor. You can now set up and share load conditions. (CR-TX-25081)

• Added an Exclude option that allows you to easily exclude a selected load case from the static analysis. (CR-TX-24847, CR-TX-25082)

• Updated the Static Analysis - Load Case Editor for the DNVGL-ST-F101 2017 edition, including a new limit state (LMST) stress type for combined load cases, and a new Limit State Load Type field for non-combined load cases and non-LMST combined loads. The software also includes an example DNV load case template file. (CR-TX-27148)

• For ASME NC-3658.3 flanged joint calculations, changed the hydrotest (HYD) load cases to use the same allowable as the occasional (OCC) load cases. (CR-TX-21979)

Equipment & Component Analysis

• Expanded the redesigned and renamed Equipment Analysis to include API 617, API 560, API 661, NEMA SM23, and HEI Standard equipment modules into the single Equipment Analysis window. (API 610 equipment was moved into the Equipment Manager in the previous release.) Changes include updates to calculations and updates to reports to meet Equipment Analysis standards. (CR-TX-3328, CR-TX-18354, CR-TX-18356, CR-TX-23231, DI-TX-25818, CR-TX-26262, TR-TX-29112)

• Added several usability improvements to Equipment Analysis. Node Number is now optional. Most recently used files are now available. Status and warnings for the equipment input display before analysis, in the status pane, and in the output report after analysis completes. (CR-TX-24168)

• Added support for EN-1591 flange leakage analysis with a new EN-1591 Analysis window. The user interface follows standards and workflow similar to Equipment Analysis, including:

  • Definition of flange, bolt, and gasket properties.

  • Definition of loads on the Loads tab.

  • Ability to update loads when the results of an imported and linked pipe stress analysis change.

  • Comprehensive output results on the Output tab.

    (DI-TX-19946)

Analysis

• For static analysis, clarified the usage of the wind load reduction factor for ASCE 7. You must explicitly apply this factor to the wind load component in a wind load case. (CR-TX-23265)

• For dynamic analysis, corrected the determination of the pressure stiffening effect on bends by excluding hydro pressure. (CR-TX-18264)

Isometrics

• Added the option to create .pdf files when you create .dwg files using Create Isometric Drawings. The software also saves .dwg drawing files and .pdf files in the same folder as the piping model. (CR-TX-16394)

• Updated Generate Stress Isometrics to Personal ISOGEN 2016 (10.0.0.1) and to I-Configure 2016 (06.00.00.11). (CR-TX-5279)

• Improved the creation of isometric drawings for models containing dummy legs. (CR-TX-22366, CR-TX-26317)

• Improved usability of stress isometric annotations. When you select a Restraint/Hanger Types or SIF/Fitting Data input feature, the software also selects the corresponding Node Numbers feature. (CR-TX-9557)

Underground Pipe Modeler

• Updated the Underground Pipe Modeler grid to support copy and paste of rows within the grid and between the grid and Excel. (CR-TX-5255)

Output Processor

• Added access to the Data Export Wizard from the Static Output Processor. (CR-TX-16573)

• Added a Maximize/Restore button to report windows for static reports. The software also saves the most recent window size and uses it when you open the next report window. (CR-TX-1206)

• Changed standard reports to more consistently report component stresses.

  • Created a standard Stresses report, which shows the corresponding component stress consistent with code stress instead of a generic engineering stress.

  • Created a new Stresses (Multiple Code/Allow.) report for transportation and offshore codes showing all code stresses instead of the highest code stress.

  • Changed the Stresses Extended report to the Stresses Extended (Legacy) report.

  • Removed the previous Stress and Code Compliance reports.

  • Renamed the Code Compliance Extended report to Code Compliance.

(CR-TX-25768, CR-TX-26310, CR-TX-26629, CR-TS-27189)

• Added standard reports for the DNV 2017 piping code: DNV Components, DNV Details, and DNV Thickness Overview. (CR-TX-28080, CR-TX-28083)

External Interfaces

• Improved Import PCF to allow you to import a large number of files. (CR-TX-23420)

• Added a new PCF Mapping utility to Import PCF and Advanced PCF Import (APCF). This utility allows you to customize your PCF mapping and add attributes, such as additional temperature and pressure attributes. You can create a custom mapping from your 3D or CAD design PCF attribute directly to a CAESAR II field. (CR-TX-997, RI-TX-24981, RI-TX-25141)

• Added an interface for BOSfluids file import, using a dialog box similar to the other hydraulic module interfaces. Also added an option to directly open Dynamic Analysis after import completes. (CR-TX-20097)

• Updated the neutral file format so that line numbers, line color, line visibility, and bend overlay thickness now import and export. (CR-TX-4336)

• Improved the Data Export Wizard to allow multiple output report exports in one session. Improved defaults of the Input and Output Files window and changed the default output file format to .accdb (Microsoft Office 2007 and later Access database) to improve usability. (CR-TX-26737)

• The DynPlot dynamic output animation window allows you to export all time history dynamics data into a log file for use in post processing. (CR-TX-28404)

Documentation/Help

• Converted help to a new help viewer with an improved interface and search capabilities, and changed the format of units in the help to eliminate display issues. You can use tooltips or interface labels for the current units of a field. (DI-TX-24906, DI-TX-27046, DI-TX-22964, DI-TX-24906)

• Updated thermal coefficient of expansion topics to specify the length and temperature units of the model. (CR-TX-17740)

• Added more details and equations to the CAESAR II Determines option of Allowable Stress Indicator for finding the pipe restrained/unrestrained status in the B31.4 code. (CR-TX-22370)

• Revised and reorganized Tutorial B in the CAESAR II Application Guide. (DI-TX-23250)

• Clarified usage of the Free Measure option of Distance. The option should only be used in 2D views. (CR-TX-22845)

• Added a shortcut key overview. For more information, see Shortcut Keys in the CAESAR II User's Guide and the CAESAR II Quick Reference Guide. (DI-TX-24231, RI-TX-24977)

• Added information on editing ASCII text files. (CR-TX-24528, CR-TX-22747)

• Clarified descriptions of numeric calculations in delta and length fields of Classic Piping Input. (CR-TX-24463)

• Added descriptions for Multiple Load Case Hanger Design Options in the Hangers auxiliary panel, the Hanger Design Control Data dialog box of Classic Piping Input, and the Technical Discussions section. (DI-TX-25488, DI-TX-28115)

• Added a note to Type for SIFs & Tees that describes the importance of properly defining tees to avoid overly conservative SIF values. (SI-TX-27775)

Customer Support
Anti-Piracy Statement
Copyright © 1985-2019, Hexagon AB and/or its subsidiaries and affiliates
Documentation updates available from Hexagon PPM Documentation
Published: 12/5/2019 at 10:30