-
Select Insert > Control Point.
-
Select the pipe part in the model that needs a note.
Use the quick pick tool to make the correct selection.
-
Position the control point on the centerline of the pipe part. For precision placement, use commands like Measure , PinPoint , or Point Along.
-
In the Type box, verify that Control Point is selected.
-
Confirm or change the option in the Subtype box on the ribbon.
-
In the Name box, define a name for the control point.
-
Click Properties .
-
Under the Notes tab, click New Note.
-
In the Key point box, select the control point to which to attach the note.
-
In the Notes at this location, listed by name box, type or select a name.
-
In the Purpose of note box, select Fabrication so that the note is picked up for inclusion in the drawing.
-
In the Note text box, type descriptive text for the note.
-
Check the Show dimension box if you want a dimension to appear on the drawing.
-
Click OK.
-
In the Drawings and Reports task, use the Update Now or Batch > Update commands to update the drawing that includes the pipe part with the associated control point.
The note appears where it was placed in the model.