Properties Tab (Compare with Design Basis Dialog Box) - Intergraph Smart 3D - Administration

Intergraph Smart 3D Integration

Language
English
Product
Intergraph Smart 3D
Subproduct
Integration
Search by Category
Administration & Configuration
Smart 3D Version
11 (2016)

Selected

Specifies the name of the selected object in the 3D model. A P&ID pipe run can correlate with multiple Smart 3D pipe runs. A P&ID pipeline can correlate with multiple Smart 3D pipelines. The Selected drop-down lists all objects in the 3D model that are correlated with the design basis object.

Category

States the category for the property. Properties are listed in alphabetical order according to the interface of the category that you selected for the property pages of the 3D model. Select All to list all the properties in alphabetical order.

The read-only field beside the Category box provides the following information about the correlation for the object that you selected in the 3D model:

  • Property Match - Indicates that the object that you selected in the model has all properties matching those of its correlated design basis object.

  • Property Mismatch - Indicates that the object that you selected in the model has one or more properties with values not matching the value of the mapped property in the correlated object.

The check box beside the Model Property Name allows you to selectively update the properties in the list. You must select Copy properties from design basis to enable the selective update check boxes.

  • indicates clear or disabled state. Selective update is disabled or none of the properties are selected for update.

  • indicates select state. All the properties in the list are selected for update.

  • indicates mixed state. One or more properties in the list are either read-only or not selected for update.

  • indicates read-only. You cannot update this property.

  • You must check the selective update check box of the corresponding property to set its correlation status to Property Match.

  • The software remembers the last saved selective update preference for an object type such as a pipe run, equipment, and pipeline system. For example, if you do not want to update Name for piperun1, clear the checkbox corresponding to Name, and then click Update. When you correlate piperun2, the dialog box displays your preference from the piperun1 you last correlated.

Model Property Name

States the name of the property for the model object.

Design Basis Value

States the value of the property for the design basis object.

To view the difference between design basis value and model value, set the Precision value to 4 or more for the properties you defined for comparison, such as pressure and temperature. For more information, see Units of Measure Tab (Options Dialog Box).

Model Value

States the value of the property for the three-dimensional model object.

To view the difference between design basis value and model value, set the Precision value to 4 or more for the properties you defined for comparison, such as pressure and temperature. For more information, see Units of Measure Tab (Options Dialog Box).

Correlation Approval Status

Specifies if the object is approved with discrepancies in the 3D model data compared with design basis data. Select Topology mismatch approved if the object topology mismatch can be ignored. Select Data and Topology mismatches approved if the object data and topology mismatches can be ignored. Select None if you do not want to approve a mismatch.

Copy properties from design basis

Controls copying of properties from the design basis object to the 3D model object. Select this option to allow the update of 3D object properties during manual correlation. Clearing this option clears and disables all the selective update check boxes.

Update

Transfers data from the design basis object (in the P&ID, for example) to match the 3D model object. Clicking Update changes entire property values if selective update check box is disabled.

Close

Closes the Compare with Design Basis dialog box.

Integrated project/as-built mode has some known issues and should be used only on pilot/test implementations in conjunction with support from Intergraph Consulting Services until proven against customers' specific business processes. This functionality will be enhanced in a future release.

See Also

Compare Design Basis with the Model
Compare with Design Basis Dialog Box