DivisionW3 Sheet - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D HVAC Reference Data

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Reference Data
Version_SThreeD_Custom
12 (2018)

The DivisionW3 sheet in the HVAC.xls workbook defines the reference data in the Catalog for a division feature, which is a component that divides the HVAC rectangular duct into three ducts along the width of duct. The division feature has four ports: the original duct port and the resulting three ducts ports.

PartNumber

Type the part number for the division feature. An example is DivisionW3-01.

SymbolDefinition

Type the symbol definition for the division feature.

FaceWidth

Type the face width of the damper for the division feature.

FaceDepth

Type the face depth of the damper for the division feature.

ComponentType

Type the component type for the division feature.

PartDescription

Type a description for the division feature.

Width

Type the width of the division feature.

Depth

Type the depth of the division feature.

Cell

Type a description of the cell associated with the division feature.

CellDimension

Type the dimension of the cell for the division feature.

CellDimension3or4

Type the dimension of the cell for the third or fourth division feature.

For the remaining properties, (i) indicates an integer corresponding to a nozzle number assigned to the cross section. This method avoids a lengthy listing for all possibilities, like Nozzle(1):CrossSection, Nozzle(2):CrossSection, and Nozzle(3):CrossSection for three possible nozzles. When you type the nozzle properties in the workbook, substitute a number for i to assign the nozzle to the appropriate property.

Nozzle(i):CrossSection

Identify the cross section for the particular nozzle. OCS-6X4 is an example.

Nozzle(i):EndPrep

Type the coded end preparation for the nozzle. Examples of end preparations include Threaded, Screwed, Plain End, Welded, Bolted, Female, Male, and Ferule. In the reference data, a number represents each type of end preparation (for example, 1 for Threaded, 2 for Screwed and so on).

Nozzle(i):Thickness

Type the thickness of the nozzle.

Nozzle(i):FlangeWidth

Type the flange width for the nozzle.

Nozzle(i):FlowDirection

Type the flow direction for the nozzle.

Nozzle(i):PortDepth

Type the depth of the port for the nozzle.

Nozzle(i):CptOffset

Type the offset value for the component.