The RoundElbow sheet in the HVAC.xls workbook defines the round elbows that you want in the Catalog.
Type the part number for the round elbow. An example is B-100.
Type a description for the round elbow.
Type the face width for the round elbow.
Type the face depth for the round elbow.
Type the component type for the round elbow.
Type the symbol definition for the round elbow.
Type the width of the round elbow.
Type the curve radius for the round elbow.
Specify the number of degrees in the angle for the round elbow.
For the remaining properties, (i) indicates an integer corresponding to a nozzle number assigned to the cross section. This method avoids a lengthy listing for all possibilities, like Nozzle(1):CrossSection, Nozzle(2):CrossSection, and Nozzle(3):CrossSection for three possible nozzles. When you type the nozzle properties in the workbook, substitute a number for i to assign the nozzle to the appropriate property.
Identify the cross section for Nozzle 1. OCS-4 is an example.
Identify the cross section for the particular nozzle. OCS-4 is an example.
Type the coded end preparation for the nozzle. Examples of end preparations include Threaded, Screwed, Plain End, Welded, Bolted, Female, Male, and Ferule. In the reference data, a number represents each type of end preparation (for example, 1 for Threaded, 2 for Screwed and so on).
Type the thickness of the nozzle.
Type the flange width for the nozzle.
Type the flow direction for the nozzle.
Type the depth of the port for the nozzle.
Type the offset value for the component.