Define drawing output format - Intergraph Smart Isometrics - Help - Hexagon PPM

Intergraph Smart Isometrics Help

Language
English
Product
Intergraph Smart Isometrics
Search by Category
Help
SmartPlant Foundation / SDx Version
10
I-Configure Version
6.0(2016)
Isogen Version
13.0(2016)
Smart Isometrics Version
2019 R1 (7.1)
Spoolgen Version
2019 R1 (9.1)

By default, Smart Isometrics creates drawings in DXF (AutoCAD) format. However, you can use I-Configure to define your project settings so that you can create other drawing output formats, such as .dwg (AutoCAD), .dgn (MicroStation), .sha (Shape2D), and .igr (SmartSketch).

  1. Open I-Configure.

    SHARED Tip Click Start > Intergraph Smart Isometrics > I-Configure.

  2. Select your project in the Project View Panel.

    ProjViewPanel

  3. Select the style that has the drawing output format to change. In the example, Check is selected.

    CheckStyle

  4. In the Properties panel, click Edit to open Isogen Configuration and display the Home screen.

  5. Click Drawing Generation in the Drawing Manager panel to switch to the Configuration view and display the Drawing Generation panel.

  6. Expand Overview, and set Output Format to the required drawing output format.

  7. Click Save.

  8. Repeat steps 3-7 to change the drawing output format for other styles in your project.

  9. When you are finished, click to close Isogen Configuration, and then click File > Exit to close I-Configure.