Place a manual chamfer - Intergraph Smart 3D - Help

Intergraph Smart 3D Structural Detailing

Language
English
Product
Intergraph Smart 3D
Subproduct
Structural Detailing
Search by Category
Help
Smart 3D Version
11 (2016)
  1. Click Place Manual Chamfer .

  2. Select a chamfer creation method from the Chamfer Method list.

  3. Select the part that contains the first port.

  4. Select a port from the selected part.

  5. For a Bounded Plate Chamfer , select a port from another part that:

    • Overlaps the port of the parent part.

    • Has a different root plate.

    • Has its face normal in the opposite direction to the parent part face.

    • Does not have a chamfer.

  6. For an Indirect Plate Chamfer , select a port from another part that:

    • Is within 200 mm from the port of the parent part.

    • Intersects when projected onto the port of the parent part.

    • Has its face normal in the opposite direction to the parent part face.

    • Does not have a chamfer.

  7. Select the Chamfer Class.

  8. Select an extension type for the chamfer. If you select Extend by Value, type the start and end extension values in the Extension 1 and Extension 2 boxes.

  9. Select the root class from the Chamfer Class list.

  10. Click Finish.