GC Point by Surfaces Ribbon - Intergraph Smart 3D - Help

Intergraph Smart 3D Structural Detailing

Language
English
Product
Intergraph Smart 3D
Subproduct
Structural Detailing
Search by Category
Help
Smart 3D Version
11 (2016)

Select

Selects an existing geometric construction object, such as a curve or surface, to edit or delete.

Add

Selects geometry that defines a new geometric construction. Used with the numbered options listed below.

Delete

Deletes a selected geometric construction.

Cancel

Cancels the macro, closes the geometric construction ribbon and the Geometric Construction Palette Dialog, and then returns to the main command ribbon.

Close

Verifies the validity of values selected for the options, closes the geometric construction ribbon and the Geometric Construction Palette Dialog, and then returns to the main command ribbon. The selected values are still available when you click again on the main command ribbon.

Geometric Construction

Displays the current geometric construction interface. You can also select a different, recently-used interface or More.

More

Opens the Select Geometric Construction dialog. For a new geometric construction, all interfaces delivered with the software are available. For an existing geometric construction, only similar interface types are available.

Geometric constructions displaying only in the Select Geometric Construction dialog are not intended for general usage. You should first consult your Hexagon support representative before using these geometric constructions.

1

Specifies the first surface, reference plane, or plate system.

2

Specifies the second surface. The second curve must intersect the first surface.

3

Specifies the third surface. The second curve must intersect the first and second surfaces.

The intersection of the three surfaces must create a discrete point.

Specifies a tracking point used to control the direction of point placement when an ambiguity exists. A tracking point is only needed with some curves, such as:

  • A circle defined by two points and a mid-point in which there are two arcs between the start and end points.

  • A curve on multiple sides of a non-planar surface, such as a seam or reference curve wrapping around a hull.

This value is optional.

The selected tracking point must be an existing point previously created with Insert > Control Point, Insert > Topological Points (Insert Menu), or other geometric contruction points.

Color Coding

For a new geometric construction, you can identify the status of input items by the background color of the step:

  • - No background color when there is no input.

  • - Yellow background when an input is selected.

  • - Blue background when an input was selected for the previous geometric construction. The input can also be used for the current geometric construction.

Selected inputs display highlighted in pink in the Workspace Explorer and as pink dotted lines in the graphic view:

When changing an existing geometric construction to a different definition, colors represent the different value changes:

  • and - No background color when you keep the value of the original geometric construction.

  • and - Yellow background when you change a value.

  • and - Blue background when the software changes a value to a new suggested value.

 Reject

Clears the selections for the current step.

 Accept

Accepts the current selections and displays a preview.

Continue

Completes the geometric construction definition. The ribbon continues to display so that you can define parameters for additional geometry.

The geometric constructions are not created and saved to the model until you click Finish on the main command ribbon to create the model object.

Track Flag

Controls how the tracking point is used an ambiguity exists. Select Near to use the curve nearest to the tracking point. Select Far to use the curve farthest from the tracking point.