Specify the backing sheet - Isogen - Help

Isogen Configuration Help

Language
English
Product
Isogen
Search by Category
Help
I-Configure Version
6.0(2016)
Isogen Control Panel Version
2.0(2016)
Isogen Version
13.0(2016)
  1. Open the Drawing Setup Tool.

  2. On the Basic Setup page, click Browse , and navigate to the backing sheet template file to use.

    • In I-Configure, a large selection of pre-formatted backing sheets is delivered with the software to the [Installation Drive]:\Program Files (x86)\Common Files\Intergraph\I-Configure\Backing Sheets folder.

    • In Smart 3D, the delivered backing sheets are stored as .igr files in the [Reference Data Product Folder]\SharedContent\PmfgIsoStyleData folder on the server.

  3. Select the required drawing output format. The default setting is Smart DWG (DWG).

  4. Set the required drawing size. If you select Custom, you must specify values for Width and Height.

  5. Under Reports, specify the reports that you want Isogen to plot on the isometric drawing. If a user-defined material list is to be plotted, you must specify the required number of sections. By default, two sections are output on the material list.

  6. Click to update the active isometric style with the new settings.

In Smart 3D, if you change the backing sheet template file, the software copies the referenced file to the Catalog database and accesses the file from the database rather than from the folder location specified in the Template box. As such, when you re-open then Drawing Setup Tool after changing the template file the Template box displays a path to the Temp folder.