Generate an isometric drawing - Intergraph Spoolgen - Help

Intergraph Spoolgen Help

Language
English
Product
Intergraph Spoolgen
Search by Category
Help
SmartPlant Foundation / SDx Version
10
I-Configure Version
6.0(2016)
Isogen Version
13.0(2016)
Smart Isometrics Version
2019 R1 (7.1)
Spoolgen Version
2019 R1 (9.1)

The steps below are applicable for Spoolgen projects. If you are logged in to an IsogenDB project, see Generate deliverables for an IsogenDB project pipeline.

  1. Click Generate Drawings on the Standard toolbar.

    The Generate Drawings dialog box displays.

  2. Specify the settings for Isometric style, Output units and North arrow as needed.

  3. Click OK to generate the drawing.

    After the drawing generation process completes, the software opens the Deliverables Generated dialog box.

  • The options on the Deliverables Generated Dialog Box enable you to view the isometric drawing, view the log file created during drawing generation, or View extraction data collected from the drawing generation process.

  • If drawing generation fails, the software displays the Drawing Generation Message box. Click View Messages to view the log file, or click Generation Logs to view the extraction data. To close the message box, click OK.

Batch drawing generation

  1. Click File > Batch Generate Drawings.

    The Open dialog box displays.

  2. Select the pipelines, and then click Open.

    The Generate Drawings dialog box displays.

  3. Specify the settings for Isometric style, Output units and North arrow as needed.

  4. Click OK to generate the drawings.

    When drawing generation completes, the software displays a message. Click Yes to view the SPIBatchGenerate.log file. Otherwise, click No.

    The log file is saved in your local Temp folder.