Function
|
System Response
|
Prompt 1
|
Pick left justified insertion point: pick a point in the drawing Rotation angle: pick a direction or enter angle Enter scale: type a string on the command line, and press ENTER
|
Prompt 2
|
Pick left justified insertion point: pick point in the drawing Rotation angle: pick direction or enter angle Enter mark: type a string on the command line, and press ENTER Enter scale: type a string on the command line, and press ENTER
|
Prompt 3
|
Pick left justified insertion point: pick a point in the drawing Rotation angle: pick a direction in the drawing or enter angle Enter mark: type a string on the command line, and press ENTER (ex: A) Enter drawing: type a string on the command line, and press ENTER (ex: 106) Enter scale: type a string on the command line, and press ENTER (ex: 3/8"=1'-0")
|
Prompt 4
|
Pick insertion point: pick a point in the drawing Section direction: pick a direction in the drawing Projection direction: pick a direction in the drawing Enter mark: type a string on the command line, and press ENTER (ex: A)
|
Prompt 5
|
Pick insertion point: pick a point in the drawing Section direction: pick a direction in the drawing Projection direction: pick a direction in the drawing Enter mark: type a string on the command line, and press ENTER (ex: A) Enter drawing: type a string on the command line, and press ENTER ( ex: 106)
|
Prompt 6
|
Pick insertion point: pick a point in the drawing Section direction: pick a direction in the drawing Projection or other direction: pick a direction in the drawing
|
Prompt 7
|
Pick object to mark: pick an object in the drawing Pick mark location: pick point in the drawing Enter mark: type a string on the command line, and press ENTER (ex: A)
|
Prompt 8
|
Pick object to mark: pick an object in the drawing Pick mark location: pick a point in the drawing Enter mark: type a string on the command line, and press ENTER (ex: A) Enter drawing: type a string on the command line, and press ENTER (ex: 106)
|
Prompt 9
|
Pick left end point: pick a point in the drawing Pick right end point: pick a point in the drawing Enter title: type a string on the command line, and press ENTER (ex: ELEVATION NORTH) Enter scale: enter a string (ex: 3/8"=1'-0")
|
Prompt 10
|
Pick instrument to label: pick a point in the drawing Pick mark location: pick a point in the drawing Enter first level label: type a string on the command line, and press ENTER (ex: SDV) Enter second level label: type a string on the command line, and press ENTER (ex: 1)
|
Prompt 11
|
Pick instrument to label: pick a point in the drawing Pick mark location: pick a point in the drawing Enter first level label: type a string on the command line, and press ENTER (ex: PI) Enter second level label: type a string on the command line, and press ENTER (ex: 106) Enter third level label: type a string on the command line, and press ENTER (ex: B)
|
Prompt 12
|
Pick center insertion point: pick a point in the drawing Rotation angle: pick a direction or enter angle
|
Prompt 13
|
Pick center insertion point: pick a point in the drawing
|
Prompt 14
|
Pick center insertion point: pick a point in the drawing Pick direction: pick a direction
|
Prompt 15
|
Pick insertion point: pick a point in the drawing (not center insertion, outside edge) Pick direction: pick a direction in the drawing Enter mark: type a string on the command line, and press ENTER (ex: 101)Weld
|
Prompt 16
|
Pick leader start point: pick a point in the drawing Pick intermediate point: pick a point in the drawing Pick direction for tail: pick a direction in the drawing
|
Prompt 17
|
Pick insertion point: pick a point in the drawing Pick rotation: pick a direction in the drawing
|
Prompt 18
|
Pick insertion point: pick a point in the drawing
|
Prompt 19
|
Pick insertion point on line: pick a point in the drawing Pick rotation: pick a direction in the drawing
|
Prompt 20
|
Pick location: pick a point in the drawing Pick rotation or [Up/Down/Roll/mirrorX/mirrorY/mirrorZ]: select an option or pick the rotation
|