Insert beams at elevation - CADWorx - Help

CADWorx Structure

Language
English
Product
CADWorx
Subproduct
Structure
Search by Category
Help
CAESAR II Version
12
CADWorx Version
20.0 (2020)
CADWorx Structure Version
2020(4.0)

Show Me

  1. Click Shapes on the Model panel.

  2. Click a shape in Section Type.

    You can insert concrete members from the Shapes palette. Follow the same steps to insert concrete shapes.

  3. Select a Section Data Table.

  4. Select a Member Size.

  5. Select a Material, or keep the default.

  6. Type an Angle for the shape.

  7. Select a Cardinal Point.

  8. Select or clear the Reflect check box.

  9. Select a Group.

  10. Select a Layer, or keep the default.

  11. Click the Details tab.

  12. If needed, edit the Long Description and Short Description. For more information, see Shapes.

  13. If required, type a Part Number and a Tag.

  14. If you have Custom Fields, you can change the shape Value.

    Right-click, and then select Reset or Reset All to reset the Value to the default value from the Structure Editor.

  15. Select Beam Elevation from the Place By list.

  16. Click Insert.

  17. Type the elevation of the cardinal point for the beam on the command line, and then press ENTER.

  18. Select a pair of columns to connect with the beam at the set elevation, and then press ENTER.

  19. Select additional pairs as needed, and then press ENTER to finish.

    The software inserts beams at the specified elevation between the selected columns.