The Change toolbar contains commands that you can use to modify elements of your symbol. You can activate the Change toolbar by using the View > Toolbars command.
Associative Offset - Draws an offset copy of a curve and applies an offset relation. For more information, see Associative Offset Command. |
|
Move/Copy - Moves elements from one location to another. For more information, see Move Command. |
|
Nudge - Moves an element or a select set in small increments. For more information, see Nudge Command. |
|
Offset - Draws an offset copy of an element or a set of contiguous elements. For more information, see Offset Command. |
|
Place Offset Curve by Hint - Places another curve next to the selected curve at the defined offset. This command places a hint handle so that the offset curve is always on the same side of the base curve as the hint handle. For more information, see Offset Curve with Hint. |
|
Rotate - Rotates one or more elements. For more information, see Rotate Command. |
|
Mirror - Mirrors one or more selected elements about a line that you define. For more information, see Mirror Command. |
|
Align - Allows you to align two or more elements in a selection set. For more information, see Align Command. |
|
Align Dimensions - Select linear dimensions and align them to a common point. For more information, see Align Dimensions Command. |
|
Scale - Reduces or enlarges selected elements by a scale factor that you define. For more information, see Scale Command. |
|
Rectangular Pattern - Copies selected elements in a rectangular pattern. For more information, see Rectangular Pattern Command. |
|
Circular Pattern - Arranges selected elements in a circular pattern. For more information, see Circular Pattern Command. |
|
Delete - Deletes the selected element and any relationships and dimensions that have been placed on it. For more information, see Delete Command. |
|
Bring to Front - Moves a selected element to the front of the display order. For more information, see Bring to Front Command. |
|
Send to Back - Moves a selected element to the back of the display order. For more information, see Send to Back Command. |
|
Pull Up - Moves a selected element up one position in the display order. For more information, see Pull Up Command. |
|
Push Down - Moves a selected element down one position in the display order. For more information, see Push Down Command. |
|
Group - Binds elements so that you can locate, select, and manipulate them as a unit. For more information, see Group Command. |
|
UnGroup - Removes elements from groups that were defined using the Group command. For more information, see UnGroup Command. |