Flange Dimension Lookup
Opens the Flange Dimension Lookup dialog box, which allows you to define general flange properties for weld neck flanges. The software then fills in flange and gasket dimensions with the closest standard size. For more information, see Flange Dimension Lookup Dialog Box.
Label
Defines a label for the flange assembly. The software defines the value as Flange Pair by default, but you can change it.
Description
Specifies a description for the component. This is an optional property.
Annex G (EN 1591-1:2001)
Defines use of the EN-1591 Annex G alternative method for joints with spacer-seated flanges. Select to use this method.
Face ID (Fid)
|
|
|
Adapted from Figure 8, EN 1591-1:2001+A1, Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation method |
Defines Fid, the inner diameter of the flange face.
If you use Flange Dimension Lookup , the software defines a value for this field.
Face OD (Fod)
|
|
|
Adapted from Figure 8, EN 1591-1:2001+A1, Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation method |
Defines Fod, the outer diameter of the flange face.
If you use Flange Dimension Lookup , the software defines a value for this field.
Bolt Circle Diameter (d3)
|
|
|
Adapted from Figure 8, EN 1591-1:2001+A1, Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation method |
Defines d3, the diameter of the bolt circle.
If you use Flange Dimension Lookup , the software defines a value for this field.
Pierced Bolt Hole Diameter (d5)
|
|
|
Adapted from Figure 8, EN 1591-1:2001+A1, Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation method |
Defines d5, the diameter of the bolt holes in the flange.