Defines the density of the refractory or liner. Type a value or select a material from the list for Refract Density. When you select a material, the density value displays. For ISO-14692 2017, type a value for Liner Density.
-
Refractory densities are much higher than insulation densities and could lead to undersized restraints.
-
ISO-14692 2017 distinguishes between the reinforced wall thickness and the total wall thickness. The reinforced wall thickness does not include the liner (inside) and sheath (outside) the reinforced wall. In CAESAR II, define the reinforced dimension (not including the liner and sheath) for Diameter and Wt/Sch, and separately define Refract Thk, Refract Density, Liner Thk, and Liner Density.
-
If you specify Liner Thk, but do not specify Liner Density, then the software uses Pipe Density as the liner density.
Example Refractory Density Values
|
Metric units |
||||
|---|---|---|---|---|
|
Material |
Density |
|||
|
English |
SI / MM / TUV |
Deutsch |
Bar / France /Japan |
|
|
A.P. Green Greencast 94 |
0.9433E-01 |
0.2611E-02 |
0.2611E+01 |
0.2611E+04 |
|
A.P. Green Kast-O-Lite 25 |
0.5208E-01 |
0.1442E-02 |
0.1442E+01 |
0.1442E+04 |
|
A.P. Green Kast-Set |
0.6655E-01 |
0.1842E-02 |
0.1842E+01 |
0.1842E+04 |
|
A.P. Green Kruzite Castable |
0.8391E-01 |
0.2323E-02 |
0.2323E+01 |
0.2323E+04 |
|
A.P. Green MC-22 |
0.7234E-01 |
0.2002E-02 |
0.2002E+01 |
0.2002E+04 |
|
A.P. Green MC-30 |
0.8391E-01 |
0.2323E-02 |
0.2323E+01 |
0.2323E+04 |
|
A.P. Green VSL-35AST 94 |
0.2257E-01 |
0.6247E-03 |
0.6247 |
0.6247E+03 |
|
B & W Kaocrete 32-C |
0.8333E-01 |
0.2307E-02 |
0.2307E+01 |
0.2307E+04 |
|
B & W Kaocrete B |
0.5787E-01 |
0.1602E-02 |
0.1602E+01 |
0.1602E+04 |
|
B & W Kaolite 2200 |
0.3241E-01 |
0.8971E-03 |
0.8971 |
0.8971E+03 |
|
B & W Kaolite 2200-HS |
0.4745E-01 |
0.1313E-02 |
0.1313E+01 |
0.1313E+04 |
|
B & W Kaolite 2500-LI |
0.3472E-01 |
0.9610E-03 |
0.9610 |
0.9610E+03 |
|
B & W KAO-TAB 95 |
0.9549E-01 |
0.2643E-02 |
0.2643E+01 |
0.2643E+04 |