Returns the block location in relation to the source planning input (a block, assembly, or assembly block). If Space Volume is an input, then the software determines if the parts are inside or outside the input range. Parts within the block are drawn according to the graphic rule selected for the source.
This custom test is for all planning volume sources (block, assembly, or assembly block) in the Actions tab of the Edit Ruleset View Style dialog box. The custom test is used with plate part, profile part, and member sources.
Input
The block is the block selected as the input.
1 - Selected input |
Parent of Input
In the hierarchy explorer, the block is a parent of the source input. For example, the block is the parent of an assembly selected as the input.
1 - Selected input 2 - Parent block |
Child of Input
In the hierarchy explorer, the block is a child of the source input. For example, the block is the child of an assembly block selected as the input.
1 - Selected input 2 - Child block |
Adjacent to Input
In model space the block is next to the block selected as the input.
1 - Selected input 2 - Adjacent blocks |
Above Input
In model space the block is above (in model space) the block selected as the input.
1 - Selected input 2 - Block above input |
Below Input
In model space the block is below (in model space) the block selected as the input.
1 - Selected input 2 - Block below input |
No Input
No source planning input is selected.
Not Available
The part is not in a block.
Space Volume as an input
Inside Range
Outside Range