The StructMfgTemplateProcessAndMarking_Tube.xls workbook defines the process and marking definition rules and symbol parameters related to tube templates. The workbook is delivered to the [Product Folder]\ShipCatalogData\BulkLoad\DataFiles\StructManufacturing folder and is bulkloaded into the Catalog.
Definition Section
PartClassType
Class type SmartOccurrence defined on the PartClassTypes sheet of [Product Folder]\ShipCatalogData\BulkLoad\DataFiles\AllShipCodeLists.xls. Do not modify.
Name
Name of the smart class as it appears in the Catalog task.
SelectionRule
ProgID of the smart occurrence rule used by the smart class.
SCType
Code list value for the smart class type defined internally by the software. Do not modify.
SCSubType
Code list value for the smart class subtype defined internally by the software. Do not modify.
oa:[parameter name]
Occurrence attribute that places the named catalog attribute on the bracket Parameters tab on the Properties dialog box. The parameter also appears in the Head section.
Head Section
Name
Name of the object as it appears in the Catalog task.
SymbolDefinition
2D symbol file associated with the smart item. Parameters correspond to symbol parameters in this file.
Definition
ProgID of a definition class module within the smart occurrence rules.
ParameterRule
ProgID of a parameter class module within the smart occurrence rules.
TemplateProcessTube Sheet
Side
The side value passed in to the symbol. This is the side on which the template set is applied. Possible values are outside or inside.
Side End
The side end value passed in to the symbol. This is the end of the tube on which the template set is applied. Possible values are Base end or Offset end.
Type
The type value passed in to the symbol. Types include ShortDistance BCL, Long Distance BCL, Global_X_Max, and so on.
MinHeight
The minimum height of the template.
MaxHeight
The maximum height of the template.
Direction
The direction value passed in to the symbol.
Extension
Value and method of extension. It can be Fixed Value or Offset based (Case1 and 2 below).
BasePlane
The base plane value passed in to the symbol. The base plane is normal to the plate.
TemplateService
The template service value passed in to the symbol.
UserDefinedValues
Provides customization of various data used in service. An example is whether to apply a margin.
TemplateNaming
Provides the template naming rule.
Bevel
For future use.
TemplateMarkingTube Sheet
The following parameters are set to use fixed values, rule-based values, or to be ignored:
BaseCtrlLineMark
Creates a mark at the intersection of the template with the base control line.
FittingMark
Creates a mark at a certain distance from the top line.
FrameMarks
Creates marks at the intersection of frames with templates.
QuarterLineMarks
Creates marks at the intervals on the top line of the template.
SeamMarks
Creates marks at the end of the template bottom line before the extension.
ShipDirectionMark
Creates a mark indicating the ship directions.
CustomMarks
Creates any other marks based on rule.