Sets basic options for the currently selected system. You can change the name, the naming convention, or the parent system from this tab. Unless otherwise noted, all other information is read-only.
Category
Select the type of properties that you want to view for the selected system. Currently, you can view the Standard properties of the system or the Weight and CG (Center of Gravity) properties. The weight and center-of-gravity values that display are the sum of total weight and center-of-gravity of all objects in the selected system.
Standard
Name
Specifies the name assigned to the selected system. The software assigns a default name for the system, based on the name rule defined below.
Name Rule
Sets the conventions used in naming new systems in the system hierarchy. System names can be user- defined or automatically generated (default name rule). If the default name rule is selected, then the software remembers the name rule that you used the last time you created the currently selected system type.
Type
Displays the type of system currently selected. This information is read-only.
Unit Code
Specifies the Unit Code property. This property is available only when the Type is a Unit System.
Parent System
Specifies the parent of the selected system in the system hierarchy. You must have write access to all of the members of the selected system in order to change its assigned parent system.
Description
Specifies the description that is assigned to the selected pipeline system when it is created. This option is only available when you view the properties of a pipeline system.
Sequence Number
Specifies the identification number Smart 3D assigned to the selected pipeline system when it was created. This option is only available when you view the properties of a pipeline system.
Fluid Requirement
Specifies the fluid requirement for the pipeline system. To change the options on the list, edit the Fluid Code select list in Catalog. This option is only available when you view the properties of a pipeline system.
Fluid Type
Specifies the fluid type for the selected pipeline system. To change the options on the list, edit the Fluid Code select list in Catalog. This option is only available when you view the properties of a pipeline system.
Correlation Status
Specifies whether the object has been correlated to an object in a P&ID. The list is defined by the EFWCorrelationStatus select list.
Correlation Basis
Specifies whether the object is correlated to a P&ID object. The list is defined by the EFWCorrelationBasis select list.
Correlate Object
Indicates that the object has a correlating object in a P&ID.
No correlation is required
Indicates that the object does not have a correlating object in a P&ID.
Correlation Approval Status
Specifies whether the object is approved with discrepancies in the three-dimensional data compared with design basis data. The list is defined by the EFWCorrelationApprovalStatus sheet in the AllCodelist workbook.
Topology mismatch approved
Indicates that the object topology mismatch can be ignored.
Data and Topology mismatches approved
Indicates that the object data and topology mismatches can be ignored.
None
Indicates that you do not approve a mismatch.
Weight and CG
The weight and center-of-gravity values that display are the sum of total weight and center-of-gravity of all objects in the selected system. The center-of-gravity locations are displayed in global system coordinates along the X-, Y-, and Z-axes.
Dry Weight
Specifies the dry weight of the object.
Wet Weight
Specifies the wet weight of the object.
For equipment, the Weight and CG property Wet Weight is the sum of Dry Weight and Water Weight. The dry weight and water weight values are catalog properties defined on the part sheet for the equipment.
Dry CG X
Specifies the X-axis location of the dry center-of-gravity.
Dry CG Y
Specifies the Y-axis location of the dry center-of-gravity.
Dry CG Z
Specifies the Z-axis location of the dry center-of-gravity.
Wet CG X
Specifies the X-axis location of the wet center-of-gravity.
Wet CG Y
Specifies the Y-axis location of the wet center-of-gravity.
Wet CG Z
Specifies the Z-axis location of the wet center-of-gravity.