-
Select a cable from Workspace Explorer. Alternatively, click Edit Cable Path Command .
-
Select the cables in the Cable Selection dialog, and click OK.
-
Click Accept to accept the selection.
-
Click Select Way Features and select the cableway or conduit features in the network through which you want the cable to pass when routed using AutoRoute.
-
The software finds the shortest path between the entry and exit points, through all the way features. You can re-order the way features if the autorouted path is not appropriate.
-
Do not select more than 100 way features as this can cause AutoRoute to route inappropriately.
-
-
Click Show Order of Way Features on the Edit Cable Path ribbon.
-
In the Order of Way Features dialog, select a feature to re-order.
The feature you select in the dialog highlights in the graphic view of the software.
-
Click Move Up or Move Down to change the order of selection.
To remove a selected way feature from the list, click Remove. This action does not remove the branch feature from the model.
-
If necessary, select additional way features, and repeat step 5 until the order is correct.
-
Click OK to save the way features changes or click Cancel to undo the changes made.
-
Click AutoRoute .
The cable passes through the way features according to the modified order of way features.