General Base Plate Dimensions - Intergraph Smart Reference Data Standard Database - Version 12.1 - Help - Hexagon PPM

Standard Database for Intergraph Smart Reference Data Hangers and Supports Help

Language
English
Product
Intergraph Smart Reference Data Standard Database
Search by Category
Help
Standard Database for Smart Reference Data Version
12.1

The following dimensions are used by both SmartPart Base Plate and Rich Hanger Beam Base Plate data-driven assemblies:

Name

User Name

Category

On Property Page

Read Only

OffsetFromStructure

Offset From Structure

Dimensions

Yes

No

OffsetFromStructureRl

Offset From Structure Rule

Dimensions

No

Yes

AnchorBoltX

Anchor Bolt X

Dimensions

Yes

No

AnchorBoltXRule

Anchor Bolt X Rule

Dimensions

No

Yes

AnchorBoltXDefinition

Anchor Bolt X Definition

Dimensions

No

Yes

AnchorBoltXSelection

Anchor Bolt X Selection

Dimensions

No

Yes

AnchorBoltY

Anchor Bolt Y

Dimensions

Yes

No

AnchorBoltYRule

Anchor Bolt Y Rule

Dimensions

No

Yes

AnchorBoltYDefinition

Anchor Bolt Y Definition

Dimensions

No

Yes

AnchorBoltYSelection

Anchor Bolt Y Selection

Dimensions

No

Yes

AnchorBoltZ

Anchor Bolt Z

Dimensions

Yes

No

AnchorBoltZRule

Anchor Bolt Z Rule

Dimensions

No

Yes

AnchorBoltZDefinition

Anchor Bolt Z Definition

Dimensions

No

Yes

AnchorBoltZSelection

Anchor Bolt Z Selection

Dimensions

No

Yes

Attribute Name

Description

Implementation Details

IJUAhsStanchionOffset::
OffsetFromStructure

Specifies the offset from bottom of the base plate to the face of the supporting object.

IJUAhsStanchionOffsetRl::
OffsetFromStructureRl

Specifies the HgrSupportRule that returns the value for the offset from structure.

The hanger rule must exist in the catalog, and must be the name of a rule.

To select the offset from structure using OffsetFromStructure, do not specify any value for this property.

For example:

Rule Name: OffStructBySize

Rule ProgID: HS_S3DRules, HS_S3DRules.
OffStructBySizeBySize

IJUAhsAnchorBoltX::
AnchorBoltX

Specifies the offset for anchor bolt X.

The CustomInterfaces sheet has the default units. This sheet exists in AllCodeLists.xls.

Otherwise, specify the below mentioned units:

  • 10

  • 10mm

  • 1in

IJUAhsAnchorBoltXRl::
AnchorBoltXRule

Specifies the HgrSupportRule that returns the value for the offset for anchor bolt X.

The hanger rule must exist in the catalog, and must be the name of a rule.

To select the X offset using AnchorBoltX, do not specify any value for this property.

For example:

Rule Name: BoltOffXBySize

Rule ProgID: HS_S3DRules, HS_S3DRules.
BoltOffXBySize

IJUAhsAnchorBoltXDef::
AnchorBoltXDefinition

Specifies the definition of the offset for anchor bolt X.

If you set a value for AnchorBoltX and do not specify a definition, the software throws an error.

The following definitions are supported:

1 - Offset from baseplate edge

2 - Offset between bolts

3 - Offset from centerline of baseplate

IJUAhsAnchorBoltY::
AnchorBoltY

Specifies the offset for anchor bolt Y.

The CustomInterfaces sheet has the default units. This sheet exists in AllCodeLists.xls.

Otherwise, specify the below mentioned units:

  • 10

  • 10mm

  • 1in

IJUAhsAnchorBoltYRl::
AnchorBoltYRule

Specifies the HgrSupportRule that returns the value for the offset for anchor bolt Y.

The hanger rule must exist in the catalog, and must be the name of a rule.

To select the Y offset using AnchorBoltY, do not specify any value for this property.

For example:

Rule Name: BoltOffYBySize

Rule ProgID: HS_S3DRules, HS_S3DRules.
BoltOffYBySize

IJUAhsAnchorBoltYDef::
AnchorBoltYDefinition

Specifies the definition of the offset for anchor bolt Y.

If you set a value for AnchorBoltY and do not specify a definition, the software throws an error.

The assemblies support the following definitions:

1 - Offset from baseplate edge

2 - Offset between bolts

3 – Offset from centerline of baseplate

IJUAhsAnchorBoltZ::
AnchorBoltZ

Specifies the offset for anchor bolt Z.

Use the following definitions:

1 - Distance above plate

2 - Distance from the center of plate to the center of the bolt

IJUAhsAnchorBoltZRl::
AnchorBoltZRule

Specifies the HgrSupportRule that returns the value for the offset for anchor bolt Z.

The hanger rule must exist in the catalog, and must be the name of a rule.

To select the Z offset using AnchorBoltZ, do not specify any value for this property.

For example:

Rule Name: BoltOffZBySize

Rule ProgID: HS_S3DRules, HS_S3DRules.
BoltOffZBySize

IJUAhsAnchorBoltZDef::
AnchorBoltZDefinition

Specifies the definition of the offset for anchor bolt Z.

If you set a value for AnchorBoltZ and do not specify a definition, the software throws an error.

The assemblies support the following definitions:

1 - Distance above plate

2 - Distance from center of plate to center of bolt