The following attributes define the Complex Pipe Strap data driven assembly:
Attribute Name |
Description |
Implementation Details |
---|---|---|
IJUAhs_PipeStrap:: |
Specifies the part number or a part class for a pipe strap that is used for the support. |
Option 1 - Specify a part number or part class directly. Option 2 - Use HgrRule to get the part. Pipe Strap support is mandatory. You must specify either a PipeStrapPart or PipeStrapRule. |
IJUAhs_PipeStrapRl:: |
Specifies the hgrSupportRule that returns the part number for a hanger beam pipe. The hanger rule must be the name of an existing rule in the catalog. |
|
IJUAhsBasePlate1:: |
Specifies the part number or part class of a base plate that is used by the support. |
Option 1 - Specify a part number or part class directly. Option 2 - Use HgrRule to get the part. Base Plate support is mandatory. |
IJUAhsBasePlate1Rl:: |
Specifies the hgrSupportRule that returns the part number for a hanger beam pipe. The hanger rule must be the name of an existing rule in the catalog. |
|
IJUAhsBaseWidth:: |
Specifies the width of a base plate. |
|
IJUAhsInsBlockPt:: |
Specifies the part number or part class of a base plate that is used by the support. |
Option 1 - Specify a part number or part class directly. Option 2 - Use HgrRule to get the part. Insulation is an optional part. |
IJUAhsInsBlockRl:: |
Specifies the hgrSupportRule that returns the part number for a hanger beam pipe. The hanger rule must be the name of an existing rule in the catalog. |
|
IJUAhsGap1::Gap1 |
Specifies the gap in the side strap. |
The strap dimension changes only if IJUAhsStrap::StrapWidthInside is an occurrence attribute on the strap part. |
IJUAhsTopGap1:: |
Specifies the gap in the top strap. |
The strap dimension changes only if IJUAhsStrap::StrapHeightInside is an occurrence attribute on the strap part. |
IJUAhsInsideRad:: |
Specifies the inside diameter of a strap. If you do not specify any value for this attribute, the software calculates the diameter using the diameter of the pipe or the insulation. |
|
IJUAhsWidthWings:: |
Specifies the total wing-to-wing width of a strap. If you do not specify a value, the software calculates the width depending on the pipe diameter. |
The strap dimension changes only if IJUAhsStrap::StrapWidthInside is an occurrence attribute on the strap part. |
IJUAhs_ShoeHeight:: |
Specifies the shoe height. |
The strap dimension changes only if IJUAhsStrap::StrapHeightInside is an occurrence attribute on the strap part. |
IJUAhs_BoltOffset:: |
Specifies the bolt offset, if the bolt is available. |
|
IJUAhsGapWings:: |
Specifies the gap between the wings and the structure. |
The strap dimension changes only if IJUAhsStrap::StrapHeightInside is an occurrence attribute on the strap part. |
IJUAhsGusWings:: |
Specifies the height of the gussets, if the gussets are available. |
The strap dimension changes only if IJUAhsHeight3::Height3 is an occurrence attribute on the strap part. |
IJUAhsPlateOnOff:: |
Toggles the base plate on or off. |
|
IJUAhsPlateThick:: |
Specifies the thickness of the base plate. |
|
IJUAhsBasePlOff:: |
Specifies the vertical offset of the base plate. |
|
IJUAhs_InsulationTh:: |
Specifies the thickness of the insulation. |
|
IJUAhs_RepadPart::RepadPart |
Specifies the part number or a part class for a repad that is used for the support. |
Option 1 - Specify a part number or part class directly. Option 2 - Use HgrRule to get the part. Repad is an optional part |
IJUAhs_RepadRl::RepadRule |
Specifies the hgrSupportRule that returns the part number for a hanger beam pipe. The hanger rule must be the name of an existing rule in the catalog. |