Secondary Supports - Intergraph Smart Reference Data Standard Database - Version 12.1 - Help - Hexagon PPM

Standard Database for Intergraph Smart Reference Data Hangers and Supports Help

Language
English
Product
Intergraph Smart Reference Data Standard Database
Search by Category
Help
Standard Database for Smart Reference Data Version
12.1

Use the following attributes to define the combined trunnion data driven assembly used to form the Combined Trunnion support. For more information on how to use the attributes, see Part Specifications.

Attribute Name

Description

Implementation Details

IJUAhsTrunnionSupport::
TrunnionSupport

Specifies the part number of a Trunnion support.

Trunnion support is mandatory.

Use either GuideSupport or GuideSupportRule attribute to specify the assembly.

IJUAhsShoeSup::
ShoeSupport

Specifies the part number of a Shoe support.

Shoe support is optional.

If you do not require a shoe, do not specify any values for either the ShoeSupport or ShoeSupportRule.

IJUAhsUBoltSuppport::
UBoltSupport

Specifies the part number of a U-Bolt support.

Configure the U-Bolt as a Shoe U-Bolt.

U-Bolt support is optional.

If you do not require an U-Bolt, do not specify any values for either the UboltSupport or UboltSupportRule.

IJUAhsInsulationSupport::
InsulationSupport

Specifies the part number of an Insulation support.

Insulation support is optional.

If you do not require an insulation, do not specify any values for either the InsulationSupport or InsulationSupportRule.

IJUAhsGuideSup::
GuideSupport

Specifies the part number of a Guide support.

Guide support is optional.

If you do not require a guide, do not specify any values for either the GuideSupport or GuideSupportRule.

IJUAhsStopSup::
StopSupport

Specifies the part number of a Stop support.

Stop support is optional.

If you do not require a stop, do not specify any values for either the StopSupport or StopSupportRule.

IJUAhsMember1::
Member1Part

IJUAhsMember1Rl::
Member1Rule

Specifies the part number of a rich hanger beam steel section that is to be placed under the first trunnion leg.

IJUAhsMember1Ang::
Member1OrientationAngle

Specifies the angle of rotation for the first steel section about its length.

The following codelist values are supported:

0, 90, 180, and 270.

IJUAhsMember2::
Member2Part

IJUAhsMember2Rl::
Member2Rule

Specifies the part number of a rich hanger beam steel section to be placed under the second trunnion leg.

IJUAhsMember2Ang::
Member2OrientationAngle

Specifies the angle of rotation for the second steel section about its length.

The following codelist values are supported:

0, 90, 180, and 270.

IJUAhsSteelLen::
SteelLength

Specifies the length of the steel section part.

If you use two steel sections, they are set to the same length.