Pipe Attachment 1 Properties - Intergraph Smart Reference Data Standard Database - Version 12.1 - Help - Hexagon PPM

Standard Database for Intergraph Smart Reference Data Hangers and Supports Help

Language
English
Product
Intergraph Smart Reference Data Standard Database
Search by Category
Help
Standard Database for Smart Reference Data Version
12.1

These properties specify and customize the attachments in the support.

Attribute Name

Description

Implementation Details

IJUAhsFrPipeAtt1::PipeAtt1Part

Specifies the part number or part class for the first pipe attachment. For example, U-Bolt part number can be used as PipeAtt1Part. To select the part number using PipeAtt1Rule, do not type any value for this property.

IJUAhsFrPipeAtt1Rl::PipeAtt1Rule

Defines an HgrSupportRule that returns a pipe attachment part number. The hanger rule must exist in the catalog; it can be the name of a rule or a rule ProgID. To select the part number directly using PipeAtt1Part, do not type any value for this property.

Option 1 - Specify a part number or part class directly.

Option 2 - Use HgrRule to get the part.

The base support is a mandatory part. Specify either a Member1Part or Member1Rule.

IJUAhsFrPipeAtt1Qty::PipeAtt1Quantity

Specifies the number of PipeAtt1Part to be included in the support. Usually, 1 or 2.

IJUAhsFrPipeAxlOffset::PipeAxlOffset

Specifies the axial offset value for PipeAtt1Part along the pipe.

IJUAhsFrPipeAxlOffsetRl::PipeAxlOffsetRl

Defines an HgrSupportRule that returns a pipe attachment axial offset value.

IJUAhsBasePlate1::BasePlate1Part

Specifies the part number or part class of the first base plate. This must be a SmartPart 2 Port Plate. To select the part using BasePlate1Rule, do not type any value for this property.

IJUAhsBasePlate1Rl::BasePlate1Rule

Defines an HgrSupportRule that returns a part number or part class to use for the base plate. The hanger rule must exist in the catalog; it can be a rule name or a ProgID. To select the part directly using BasePlate1Part, do not type any value for this property.

IJUAhsBasePlate1Ang::BasePlate1Angle

Specifies the angle that BasePlate1 should be rotated about the Z-axis of the port to which the plate is attached (either BeginFace or EndFace).

IJUAhsBasePlate1Off::BasePlate1Offset

Specifies the distance by which the base plate should be offset from leg1. BasePlate1Offset is applicable only when StructureConnection is set to either Lapped or Lapped-Opposite.

IJUAhsFrGrout::GroutPart

Specifies the part number or the part class of the grout part. For example Plate part number. To select the part using GroutRule, do not type any value for this property.

IJUAhsFrGroutRl::GroutRule

Defines an HgrSupportRule. The hanger rule must exist in the catalog; it can be a rule name or a ProgID. To specify the grout part directly using GroutPart, do not type any value for this property.

IJUAhsFrGroutTh::GroutThickness

Specifies the thickness of the GroutPart.

IJUAhsBolt1::Bolt1Part

Specifies the part number or the part class of the Bolt part. For example Plate part number. To select the part using Bolt1Rule, do not type any value for this property.

IJUAhsBolt1Rl::Bolt1Rule

Defines an HgrSupportRule. The hanger rule must exist in the catalog; it can be a rule name or a ProgID.

IJUAhsBolt1Qty::Bolt1Quantity

Specifies the quantity of the Bolt1Part.

IJUAhsBolt1Offset1::Bolt1Offset1

Specifies the offset1 value of the Bolt1Part.

IJUAhsBolt1Offset2::Bolt1Offset2

Specifies the offset2 value of the Bolt2Part.