Input Dimensions - Intergraph Smart Reference Data Standard Database - Version 12.1 - Help - Hexagon PPM

Standard Database for Intergraph Smart Reference Data Hangers and Supports Help

Language
English
Product
Intergraph Smart Reference Data Standard Database
Search by Category
Help
Standard Database for Smart Reference Data Version
12.1

Use these properties to determine the total frame span and frame length.

IJUAhsFrameOffset1::Offset1Value - Specifies the distance that the member should be offset from the pipe. To select the offset value using Offset1Rule, do not type any value for this property.

IJUAhsFrameOffset1Rl::Offset1Rule - Defines an HgrSupportRule that returns the offset from the member to the pipe. The hanger rule name or the ProgID must exist in the catalog. To select the offset value using Offset1Value, do not type any value for this property.

IJUAhsFrameOffset1Def::Offset1Definition - Specifies how Offset1 should be measured. If you type an unsupported value or do not assign a value, then the software uses the default value that is 1. For I frame, this value is ignored and is always calculated from Pipe Center to Steel Center. The following values are allowed:

IJUAhsFrameOffset1Sel::Offset1Selection - Uses the hsSelection codelist in the HS_S3DAssy_Codelist.xls workbook to select Offset1 by either input or rule. Allowed values are:

By Rule - 1 – Offset1Rule is used.

By Input - 2 – Offset1Value is used.

IJUAhsFrameShoeHeight::ShoeHeightValue - Specifies the distance that the main steel member should be offset from the pipe. To determine the shoe height using ShoeHeightRule, do not type any value for this property.

IJUAhsFrameShoeHeightRl::ShoeHeightRule - Defines an HgrSupportRule that returns the shoe height. The hanger rule name or the ProgID must exist in the catalog. To determine the shoe height using ShoeHeightValue, do not type any value for this property.

IJUAhsFrameShoeHeightDef::ShoeHeightDefinition - Specifies how ShoeHeight should be measured. If you type an unsupported value or do not assign any value, then the software uses the default value that is 1.

IJUAhsB2BMemberGap:: B2BMemberGap- Specifies the distance between the main steel member and the back member.

IJUAhsStiffenerSpace::StiffenerSpace- Specifies the distance between the Stiffeners. Stiffeners will be placed starting from section middle with StiffenerSpace and StiffenerQty. To determine the stiffener space using StiffenerSpaceRl, do not type any value for this property.

IJUAhsStiffenerSpaceRl:: StiffenerSpaceRl- Defines an HgrSupportRule that returns the shoe height. The Hanger Rule must exist in the catalog; it can be a rule name or a ProgID. To determine the stiffener space directly using StiffenerSpace, do not type any value for this property.

IJUAhsSuppPosOffset::SupPosOff- Specifies the support distance from origin of the support. To determine the support position offset using SupPosOffRl, do not type any value for this property.

IJUAhsSuppPosOffsetRl::SupPosOffRl- Defines a HgrSupportRule that returns the support position offset. The hanger rule name or the ProgID must exist in the catalog. To determine the support position using SupPosOff, do not type any value for this property.