Anchor Bolt Attributes - Intergraph Smart Reference Data Standard Database - Version 12.2 - Help - Hexagon PPM

IJUAhsAnchorBoltX::
AnchorBoltX

Specifies the distance that determines the X spacing between the bolts.

To specify the value using AnchorBoltXRule, do not specify any value for this property.

The default units are specified in the CustomInterface worksheet of the HS_S3DAssy workbook. Otherwise, specify the units.

Example: 25, 25mm, 1in.

IJUAhsAnchorBoltXRl::
AnchorBoltXRule

Specifies the hgrSupportRule that returns the distance that determines the X spacing between the bolts.

The hanger rule must be the name of an existing rule in the catalog. The rule must return value in DB Units (meters).

To select the part number using AnchorBoltX, do not specify any value for this property.

Example:

Rule Name: XOffsetByPipeSize

IJUAhsAnchorBoltXSel::
AnchorBoltXSelection

Specifies a codelist value that determines the selection of the anchor bolt.

This attribute uses hsSelection codelist value from the HS_S3DAssy_Codelist.xls workbook.

hsSelection:

1 - By Rule: the software uses the rule to get the value.

2 - By Input: the software uses the value directly.

IJUAhsAnchorBoltXDef::
AnchorBoltXDefinition

Specifies the definition of the anchor bolt X spacing and how to measure the anchor bolt X-spacing.

If you specify an unsupported definition or if the attribute is left blank, the software displays an error message and the support fails.

Use the following values:

1 - Edge of the plate to the center of the bolt

2 - Center of the bolt to the center of the bolt

3 - Center of the plate to the center of the bolt

IJUAhsAnchorBoltY::
AnchorBoltY

Specifies the distance that determines the Y spacing between the bolts.

To specify the value using AnchorBoltYRule, do not specify any value for this property.

The default units are specified in the CustomInterface worksheet of the HS_S3DAssy workbook. Otherwise, specify the units.

Example: 25, 25mm, 1in.

IJUAhsAnchorBoltYRl::
AnchorBoltYRule

Specifies the hgrSupportRule that returns the distance that determines the Y spacing between the bolts.

The hanger rule must be the name of an existing rule in the catalog. The rule must return value in DB Units (meters).

To select the part number using AnchorBoltY, do not specify any value for this property.

Example:

Rule Name: YOffsetByPipeSize

IJUAhsAnchorBoltYSel::
AnchorBoltYSelection

Specifies a codelist value that determines the selection of the anchor bolt.

This attribute uses hsSelection codelist value from the HS_S3DAssy_Codelist.xls workbook.

hsSelection:

1 - By Rule: the software uses the rule to get the value.

2 - By Input: the software uses the value directly.

IJUAhsAnchorBoltYDef::
AnchorBoltYDefinition

Specifies the definition of the anchor bolt Y spacing and how to measure the anchor bolt Y-spacing.

If you specify an unsupported definition or if the attribute is left blank, the software displays an error message and the support fails.

Use the following values:

1 - Edge of the plate to the center of the bolt

2 - Center of bolt to the center of the bolt

3 - Center of plate to the center of the bolt

IJUAhsAnchorBoltZ::
AnchorBoltZ

Specifies the distance that determines the Y spacing between the bolts.

To specify the value using AnchorBoltZRule, do not specify any value for this property.

The default units are specified in the CustomInterface worksheet of the HS_S3DAssy workbook. Otherwise, specify the units.

Example: 25, 25mm, 1in.

IJUAhsAnchorBoltZRl::
AnchorBoltZRule

Specifies the hgrSupportRule that returns the distance that determines the Z spacing between the bolts.

The hanger rule must be the name of an existing rule in the catalog. The rule must return value in DB Units (meters).

To select the part number using AnchorBoltZ, do not specify any value for this property.

Example:

Rule Name: ZOffsetByPipeSize

IJUAhsAnchorBoltZSel::
AnchorBoltZSelection

Specifies a codelist value that determines the selection of the anchor bolt.

This attribute uses hsSelection codelist value from the HS_S3DAssy_Codelist.xls workbook.

hsSelection:

1 - By Rule: the software uses the rule to get the value.

2 - By Input: the software uses the value directly.

IJUAhsAnchorBoltZDef:: AnchorBoltZDefinition

Specifies the definition of the anchor bolt Z spacing and how to measure the anchor bolt Z-spacing.

If you specify an unsupported definition or if the attribute is left blank, the software displays an error message and the support fails.

Use the following values:

1 - From surface of base plate