The following attributes define the Member1 and CapPlate3/4 attributes of a Base Support data driven assembly:
Attribute Name |
Description |
Implementation Details |
|
---|---|---|---|
IJUAhsMember1:: |
Specifies the part number or the part class of the first support member to use for the support. |
Option 1 - Specify a part number or part class directly. Option 2 - Use HgrRule to get the part. The base support is a mandatory part. Specify either a Member1Part or Member1Rule. The following ProgIDs are supported: |
|
IJUAhsMember1Rl:: |
Specifies the hgrSupportRule that returns the part number for the hanger beam pipe. The hanger rule must be the name of an existing rule in the catalog. |
||
TypeAssy 3 4, 5 |
ProgID TwoHolePort TwoStandardPort |
||
IJUAhsMember1Ang:: |
Specifies the angle of rotation about the axis of the leg for the first member of the support. |
hsSteelOrientalAngle: |
|
IJUAhsMember1BeginOH:: |
Specifies the distance that the first member overhangs past the first leg. To select the overhang using Member1BeginOverhangRule, do not specify any value for this property. |
||
IJUAhsMember1Begin |
Specifies the hgrSupportRule that returns the distance. The hanger rule must be the name of an existing rule in the catalog. |
||
IJUAhsMember1EndOH:: |
Specifies the distance that the first member overhangs past the first leg. To select the overhang using Member1EndOverhangRule, do not specify any value for this property. |
||
IJUAhsMember1EndOHRl:: |
Specifies the hgrSupportRule that returns the distance. The hanger rule must be the name of an existing rule in the catalog. |
||
IJUAhsSteelLen:: |
Specifies the length for the member support. |
||
IJUAhsSteelLenRl:: |
Specifies the hgrSupportRule that returns the length. The hanger rule must be the name of an existing rule in the catalog. |
||
IJUAhsLugOffset1:: |
Specifies the distance by which a lug is offset from the edge of Leg1 part. |
LugOffset is applicable only when the AssyType is set to 3. |
|
IJUAhsLugBolt:: |
Specifies the part number or part class of the bolts that are connected to BasePlate1. To select the overhang using LugBoltRule, do not specify any value for this property. |
Option 1 - Specify a part number or part class directly. Option 2 - Use HgrRule to get the part. The pipe attachment is an optional part. If you do not require a pipe attachment, do not specify these attributes. |
|
IJUAhsLugBoltRl:: |
Specifies the hgrSupportRule that returns the plate part number. The hanger rule must be the name of an existing rule in the catalog. To select the overhang using LugBoltPart, do not specify any value for this property. |
||
IJUAhsLugBoltQty:: |
Specifies the number of bolts to include on the BasePlate1. |
||
IJUAhsLugBoltOffset1:: |
Specifies the distance by which the lug bolt must be offset from the center of the lug plate. |
LugBoltOffset is applicable only when the AssyType is set to 3. |
|
IJUAHsBSLegLateralOS:: |
Specifies the distance by which the leg must be offset in Y direction |
|
|
IJUAhsCapPlate3:: |
Specifies the part number or part class of the plate part to use for the support. To select the part number using CapPlate3Rule, do not specify any value for this property. |
Option 1 - Specify a part number or part class directly. Option 2 - Use HgrRule to get the part. The cap plate is an optional part. If you do not require a Cap Plate, do not specify this attribute. |
|
IJUAhsCapPlate3Rl:: |
Specifies the hgrSupportRule that returns the plate part number. The hanger rule must be the name of an existing rule in the catalog. To select the part number using CapPlate3Part, do not specify any value for this property. |
||
IJUAhsCapPlate3Ang:: |
Specifies the rotation angle for the Cap Plate about the axis of the Box Frame. |
||
IJUAhsCapPlate4:: |
Specifies the part number or part class of the plate part to use for the support. To select the part number using CapPlate4Rule, do not specify any value for this property. |
Option 1 - Specify a part number or part class directly. Option 2 - Use HgrRule to get the part. The Cap Plate is an optional part. If you do not require a Cap Plate, do not specify this attribute. |
|
IJUAhsCapPlate4Rl:: |
Specifies the hgrSupportRule that returns the plate part number. The hanger rule must be the name of an existing rule in the catalog. To select the part number using CapPlate4Part, do not specify any value for this property. |
||
IJUAhsCapPlate4Ang:: |
Specifies the rotation angle for the Cap Plate about the axis of the box frame. |