The Box Frame assembly uses the following Input and Output dimensions:
Input Dimensions
You can set default values for the input dimensions. If the attributes are Occurrence Attributes (OA), you can modify the default values in the Support Properties dialog box. Select Dimensions from the Category list on the General tab.
Attribute Name |
Description |
Implementation Details |
---|---|---|
IJUAhsFrameOffset1:: IJUAhsFrameOffset1Rl:: IJUAhsFrameOffset1Sel:: IJUAhsFrameOffset1Def:: |
Specifies the offset distance of the first leg from the pipe. The distance must be a positive value. |
Use the following definitions: 1 - Inside Steel to Edge of Pipe 2 - Center Steel to Edge of Pipe 3 - Outside Steel to Edge of Pipe 4 - End of Steel to Edge of Pipe |
IJUAhsFrameOffset2:: IJUAhsFrameOffset2Rl:: IJUAhsFrameOffset2Sel:: IJUAhsFrameOffset2Def:: |
Specifies the offset distance of the second leg from the pipe. The distance must be a positive value. |
1 - Inside Steel to Pipe CL 2 - Center Steel to Pipe CL 3 - Outside Steel to Pipe CL 4 - End of Steel to Pipe CL |
IJUAhsSupOriginDef::SupportOriginDefinition |
Uses the values in hsFrameOriginDef to define the position of support origin. |
Allowed values are: 1 - Center of Member 2 - Bottom of Leg 3 - Bottom of BasePlate |
IJUAhsFrameShoeHeight:: IJUAhsFrameShoeHeight IJUAhsFrameShoeHeight IJUAhsFrameShoeHeight |
Specifies the offset distance of the main steel member and member 2 from the pipe. The distance must be a positive value. |
Use the following definitions: 1 - Edge of Boundary Pipe 2 - Center of Primary Pipe |
IJUAhsFrameShoeHeight2:: ShoeHeight2Value IJUAhsFrameShoeHeightRl2:: ShoeHeight2Rule IJUAhsFrameShoeHeightDef2:: ShoeHeight2Defnition IJUAhsFrameShoeHeightSel2:: ShoeHeight2Selection |
Specifies the offset distance of the member 2 from the pipe. The distance must be a positive value. |
Use the following definitions: 1 - Edge of Boundary Pipe 2 - Center of Primary Pipe |
IJUAhsSuppPosOffset::SupPosOff |
Specifies the support distance from origin of the support. To determine the support position offset using SupPosOffRl, do not type any value for this property. |
|
IJUAhsSuppPosOffsetRl::SupPosOffRl |
Defines a HgrSupportRule that returns the support position offset. The hanger rule name or the ProgID must exist in the catalog. To determine the support position using SupPosOff, do not type any value for this property. |
Output Dimensions
determines the following output dimension values and displays them as read-only in the property page:
Attribute Name |
Description |
Implementation Details |
---|---|---|
IJUAhsFrameSpan:: IJUAhsFrameSpan:: |
Specifies the span of the Frame support. |
Use the following definitions: 1 - Inside Edge of Steel 2 - Center Line of Steel 3 - Outside Edge of Steel 4 - Steel Length |
IJUAhsFrameLength1:: IJUAhsFrameLength1:: IJUAhsFrameLength2:: IJUAhsFrameLength2:: |
Specifies the length of the first and the second legs. |
Use the following definitions: 1 - Internal Edge of Steel 2 - External Edge of Steel 3 - End of Steel 4 - Primary Pipe Center Line |
IJUAhsFrameLength3:: IJUAhsFrameLength3:: IJUAhsFrameLength4:: IJUAhsFrameLength4:: |
Specifies the length of the first and the second braces. |
Use the following definitions: 1 - Internal Edge of Steel 2 - External Edge of Steel 3 - End of Steel 4 - Primary Pipe Center Line |