Flange Support Properties - Intergraph Smart Reference Data Standard Database - Version 12.2 - Help

Flange Support Properties - Intergraph Smart Reference Data Standard Database - Version 12.2 - Help - Hexagon PPM

Standard Database for Intergraph Smart Reference Data Hangers and Supports Help

Language

English

Product

Intergraph Smart Reference Data Standard Database

Search by Category

Help

Standard Database for Smart Reference Data Version

12.2

The following attributes define the Flange Support attributes of a Base Support data driven assembly:

Attribute Name	Description	Implementation Details
IJUAhs FICurvedRad:: CurvedRad	Specifies the Flange Vertical Plate Curved Radius
IJUAhs FICurvedRadRI:: CurvedRadRule	Defines a HgrSupportRule that returns the Flange Vertical Plate Curved Radius. The hanger rule must exist in the catalog; it can be a rule name or a ProgID. To select the value of the Curved Radius directly using CurvedRad, do not type any value for this property.	Option 1 - Specify a part number or part class directly. Option 2 - Use HgrRule to get the part.
IJUAhs FIWidth::FIWidth	Specifies the Flange Vertical Plate Width
IJUAhs FIWidthRI::FIWidthRule	Defines a HgrSupportRule that returns the Flange Vertical Plate Width. The hanger rule must exist in the catalog; it can be a rule name or a ProgID. To select the value of the Width directly using FIWidth, do not type any value for this property.
IJUAhs FIOffset::FIOffset	Specifies the Flange Offset
IJUAhs FIOffset::FIOffsetRule	Defines a HgrSupportRule that returns the Flange Offset. The hanger rule must exist in the catalog; it can be a rule name or a ProgID. To select the value of the Offset directly using FIOffset, do not type any value for this property.
IJUAhs FIHeight::FIHeight	Specifies the Flange Vertical Plate Height
IJUAhs FIHeightRI::FIHeightRule	Defines a HgrSupportRule that returns the Flange Vertical Plate Height. The hanger rule must exist in the catalog; it can be a rule name or a ProgID. To select the value of the Height directly using FIHeight, do not type any value for this property.
IJUAhs FIHeightDef::FIHeightDef	Defines how the Flange Vertical Height should be measured.	Option 1 - Flange Vertical Plate Height is considered as Height. Option 2 - (Flange Vertical Plate Height - Curved Radius) is considered as Height.
IJUAhsFlangeType::FlangeType	Specifies a codelist value that determines the Flange Type based on pipe pressure rating. This attribute uses hsFlangeType codelist value from the DDS_ASSY_Codelist.xls workbook.	hsFlangeType Supported values: A, B, C.
IJUAhsLugLength::LugLength	Specifies the length of the lug from pipe edge to plate edge.
IJUAhsLugLengthRl::LugLengthRule	Specifies the hgrSupportRule that returns the Lug Length value. The hanger rule must be the name of an existing rule in the catalog. To select the Lug Length value using LugLength, do not specify any value for this property.
IJUAhsFrStiffener::StiffenerPart	Specifies the part number of the stiffeners.
IJUAhsFrStiffenerRl::StiffenerRule	Specifies the hgrSupportRule that returns the stiffeners part number. The hanger rule must be the name of an existing rule in the catalog. To select the part number using StiffenerPart, do not specify any value for this property.