Part Attributes - Intergraph Smart Reference Data Standard Database - Version 12.2 - Help - Hexagon PPM

Standard Database for Intergraph Smart Reference Data Hangers and Supports Help

Language
English
Product
Intergraph Smart Reference Data Standard Database
Search by Category
Help
Standard Database for Smart Reference Data Version
12.2

The following attributes are used to define which parts are included in the Single Pipe Wallsupport.

Leg1 Properties

Attribute Name

Description

Implementation Details

IJUAhsLeg1::Leg1Part

The part number or the part class of the first support leg to use with the support.

Option 1 - Specify a part number or part class directly.

Option 2 - Use HgrRule to get the part.

Specify either a Leg1Part or Leg1Rule.

image916

IJUAhsLeg1Rl::Leg1Rule

Specifies the hgrSupportRule that returns the part number of the Leg1Part.

The hanger rule must be the name of an existing rule in the catalog.

IJUAhsLeg1Ang::
Leg1OrientationAngle

Specifies the angle of rotation for the first leg of support. The angle is about the axis of the leg.

hsSteelOrientalAngle:

image273

Member1 Properties

Attribute Name

Description

Implementation Details

IJUAhsMember1::Member1Part

The part number or the part class of the first support member to use with the support.

Option 1 - Specify a part number or part class directly.

Option 2 - Use HgrRule to get the part.

Specify either a Member1Part or Member1Rule.

image917

IJUAhsMember1Rl::Member1Rule

Specifies the hgrSupportRule that returns the part number of the Member1Part.

The hanger rule must be the name of an existing rule in the catalog.

IJUAhsMember1Ang::Member1OrientationAngle

Specifies the angle of rotation for the first Member of support.

hsSteelOrientalAngle:

image273

Member2 Properties

Attribute Name

Description

Implementation Details

IJUAhsMember2::Member2Part

The part number or the part class of the second support member to use with the support.

Option 1 - Specify a part number or part class directly.

Option 2 - Use HgrRule to get the part.

Specify either a Member2Part or Member2Rule.

image918

IJUAhsMember2Rl::Member2Rule

Specifies the hgrSupportRule that returns the part number of the Member2Part.

The hanger rule must be the name of an existing rule in the catalog.

IJUAhsMember2Ang::Member2OrientationAngle

Specifies the angle of rotation for the second member of support.

hsSteelOrientalAngle:

image273

Single Pipe WallSupport Dimension Attributes

The Single Pipe WallSupport assembly uses the following Input and Output dimensions:

Input Dimensions

You can set default values for the input dimensions. If the attributes are Occurrence Attributes (OA), you can modify the default values in the Support Properties dialog box. Select Dimensions from the Category list on the General tab.

Attribute Name

Description

Implementation Details

IJUAhsFrameOffset1::Offset1Value

IJUAhsFrameOffset1Rl::Offset1Rule

IJUAhsFrameOffset1Def::Offset1Definition

IJUAhsFrameOffset1Sel::Offset1Selection

Specifies the offset distance from leg to one end of member1. The distance must be a positive value.

Use the following definitions:

1 - Member to one Edge of Leg1

image919

2 - Member to center of Leg1

image920

3 - Member to other Edge of Leg1

image921

IJUAhsFrameOffset2:: Offset2Value

IJUAhsFrameOffset2Rl:: Offset2Rule

IJUAhsFrameOffset2Sel:: Offset2Selection

IJUAhsFrameOffset2Def:: Offset2Definition

Specifies the offset distance from leg to other end of member1. The distance must be a positive value.

1 - Member to one Edge of Leg1

image922

2 - Member to center of Leg1

image923

3 - Member to other Edge of Leg1

image924

IJUAhsFrameVerticalSpace::VerticalSpaceValue

IJUAhsFrameVerticalSpaceRl::VerticalSpaceRule

IJUAhsFrameVerticalSpaceDef::VerticalSpaceDefinition

IJUAhsFrameVerticalSpaceSel::VerticalSpaceSelection

Specifies the distance between member1 and member 2. The distance must be a positive value.

Use the following definitions:

1 – Between inner edges of members

image925

2 - Between centers of members

image926

3 - Between outer edges of members

image927

Output Dimensions

determines the following output dimension values and displays them as read-only in the property page:

Attribute Name

Description

Implementation Details

IJUAhsFrameLength1::Length1Value

IJUAhsFrameLength1Def::Length1Definition

Specifies the length of the members.

Use the following definitions:

1 - Member to one Edge of Leg1

image919

2 - Member to center of Leg1

image920

3 - Member to other Edge of Leg1

image921

4 - Member to other Edge of Leg1

image928

IJUAhsFrameLength2::Length2Value

IJUAhsFrameLength2Def::Length2Definition

Specifies the length of the leg.

Use the following definitions:

1 – Between inner edges of members

image925

2 - Between centers of members

image926

3 - Between outer edges of members

image927