Super Assembly Attributes - Intergraph Smart Reference Data Standard Database - Version 12.2 - Help - Hexagon PPM

Standard Database for Intergraph Smart Reference Data Hangers and Supports Help

Language
English
Product
Intergraph Smart Reference Data Standard Database
Search by Category
Help
Standard Database for Smart Reference Data Version
12.2

Super assemblies are defined by the top-level sheets, describe the general support attributes, and call out the sub-assemblies such as top, middle, and bottom sub-assemblies.

Single Rod Hanger Attributes

The following graphic illustrates a Single Rod Hanger:

The following table illustrates the properties of a Single Rod Hanger:

Name

User Name

OA

Category

On Property Page

Read Only

Angle

Structure Attachment Rotation

Yes

Dimensions

Yes

No

WithTurnbuckle

With Turnbuckle

Yes

Dimensions

Yes

No

URS_AxialOffset

Axial Offset

Yes

Dimensions

Yes

No

URS_LateralOffset

Lateral Offset

Yes

Dimensions

Yes

No

OffsetZ

Z Offset

Yes

Dimensions

Yes

No

Attribute Name

Description

Implementation Details

IJUAHgrURS_RHRotation:: Angle

Specifies a codelist value for the rotation of the structure attachment around the rod.

hsSteelOrientationAngle

0, 90, 180, and 270 degrees.

IJUAHgrURS_WithTurnbuckle:: WithTurnbuckle

Toggles the Turnbuckle on or off.

Turnbuckle.

False does not include Turnbuckle.

IJOAHgrURS_AxialOffset:: URS_AxialOffset

Specifies the offset for the top part along the pipe centerline.

For more information, see Axial lateral offset in the same section.

IJOAHgrURS_LateralOffset:: URS_LateralOffset

Specifies the lateral offset for the top part from the pipe centerline.

For more information, see Axial lateral offset in the same section.

IJUAHsOffsetZ::OffsetZ

Specifies the offset value for the bottom part of the support from the pipe.

This attribute is used when no bottom type exists. For example, Pipe Lug hanger does not need a bottom type if IJUAHgrURS_RH_PipeAtt::PipeAtt is left blank in Rigid Bottom sub-assembly.

Double Rod Hanger Attributes

The following graphic illustrates a Double Rod Hanger:

The following graphic illustrates the properties of a Double Rod Hanger:

Attribute Name

Description

Implementation Details

IJUAHgrURS_DblRHRotation:: Angle1

Specifies a codelist value for the rotation of the structure attachment 1 around the rod.

hsSteelOrientationAngle

0, 90, 180, and 270 deg

IJUAHgrURS_DblRHRotation:: Angle2

Specifies a codelist value for the rotation of the structure attachment 2 around the rod.

hsSteelOrientationAngle

0, 90, 180, and 270 deg

IJUAHgrURS_WithTurnbuckle:: WithTurnbuckle

Toggles the Turnbuckle on or off.

For example:

True includes Turnbuckle.

False does not include Turnbuckle.

IJOAHgrURS_AxialOffset:: URS_AxialOffset

Specifies the offset for the top part along the pipe centerline.

For more information, see Axial lateral offset.

IJOAHgrURS_LateralOffset:: URS_LateralOffset1

Specifies the lateral offset for the top part 1 from the pipe centerline.

IJOAHgrURS_LateralOffset:: URS_LateralOffset2

Specifies the lateral offset for the top part 2 from the pipe centerline.

Riser Configuration Attributes

The following graphic illustrates a Riser Rod Hanger support:

The following graphic illustrates the properties of a Riser Rod Hanger support:

Attribute Name

Description

Implementation Details

IJUAHgrOrientation:: OrientationAngle

Specifies the angle that the Riser Clamp rotates around the pipe

IJOAHgrURS_RiserSpan:: RiserSpan

Specifies the pin-to-pin distance of the Riser Clamp.

IJOAHgrURS_RiserSpan:: PinOverhang

Specifies the pin-to-edge distance of the Riser Clamp.

Trapeze Configuration Attributes

The following graphic illustrates a Trapeze Rod Hanger:

The following graphic illustrates the properties of a Trapeze Rod Hanger:

Attribute Name

Description

Implementation Details

IJUAhsMirrorTrap:: MirrorTrap

Specifies the value for the Trapeze mirror about the bounding box.

Use the following values:

rod_hanger3

IJUAhsIncludeInsulation:: IncludeInsulation

Specifies whether the Trapeze must adjust the size to include pipe insulation.

Supported values:

rod_hanger4

IJUAhsTrapOffset1:: Offset1Value

IJUAhsTrapOffset2:: Offset2Value

Specifies the offset distance for the first rod from the pipe.

Use the following

1 - Inside Rod to Edge of Pipe

rod_hanger5

3 - Outside Rod to Edge of Pipe

rod_hanger7

5 - Inside Rod to Pipe CL

rod_hanger9

7 - Outside Rod to Pipe CL

definitions:

2 - Center of Rod to Edge of Pipe

rod_hanger6

4 - End of Steel to Edge of Pipe

rod_hanger8

6 - Center Rod to Pipe CL

8 - End of Steel to Pipe CL

IJUAhsTrapShoeHeight:: ShoeHeightValue

Specifies the offset distance from the pipe to the Trapeze.

Use the following definitions:

1 - Edge of Boundary Pipe (Edge of BBX)

image686

2 - Center of Primary Pipe

image687

IJUAhsTrapBeginOH:: TrapBeginOverhangValue

IJUAhsTrapEndOH:: TrapEndOverhangValue

Specifies the distance that the Trapeze must overhang past the first rod.

Use the following definitions:

1 - External Edge of Rod

image688

2 - Centerline of Rod

image689

3 - Internal Edge of Rod

image690

IJUAhsTrapSpan::SpanValue

Specifies the Trapeze span.

Use the following definitions:

1 - Inside Edge of Rods

image219

2 - Centerline of Rods

image220

3 - Outside Edge of Rods

image221

4 - Steel Length

image222

IJOAHgrURS_BackToBack:: BBGap

Specifies the distance between the back to back sections in the Trapeze.

image693

Spring Configuration Attributes

The following graphic illustrates the properties of Variable and Constant Spring parts of the Rod Hanger support:


Attribute Name

Description

Implementation Details

IJUAHgrURS_Spring:: SpringAssembly

Specifies the Spring Assembly name that you must use for the support. This value is used as the first part of the part number for the middle sub-assembly.

For example,

SpringAssembly = ConstantHangerMiddle-

SpringType = A

part number = ConstantHangerMiddle-A

IJUAHgrURS_Spring:: SpringType

Specifies the Spring Type that you must use for the support. This value is used as the first part of the part number for the middle sub-assembly.

IJUAHgrURS_Spring::TotalLoad

Specifies the total load. For more information, see the 3D SmartParts Configuration Reference.

IJUAHgrURS_Spring::TotalTravel

Specifies the total travel.

IJUAHgrURS_Spring:: ActualTravel

Specifies the actual travel.

IJUAHgrURS_Spring::TravelDir

Specifies the direction of the spring movement.

hsSpringMovementDir

1 = Up

2 = Down

IJUAHgrURS_Spring::ColdLoad

Specifies the cold load value for the Variable Springs only.

IJUAHgrURS_Spring::Variation

Specifies the variation for the Variable Springs only.

IJUAHgrURS_ConstantSpring:: ConstantSpringPart

Specifies the Constant Spring part class name for the constant hangers only.

hsConstatnSpringPart codelist.

IJUAHgrURS_VariableSpring:: VariableSpringPart

Specifies the Variable Spring part class name for variable hangers only.

hsVariableSpringPart codelist.

IJUAHgrURS_SpringSize:: SpringSize

Specifies the size of the spring part for the support.