Name |
User Name |
OA |
Category |
On Property Page |
Read Only |
---|---|---|---|---|---|
RiserLugQty |
Riser Lug Quantity |
Yes |
Standard |
Yes |
No |
RiserLugQtyRule |
Riser Lug Quantity Rule |
No |
Standard |
No |
Yes |
RiserLugOffset |
Riser Lug Offset |
Yes |
Dimensions |
Yes |
No |
RiserLugOffsetRule |
Riser Lug Offset Rule |
No |
Standard |
No |
Yes |
RiserLugOffsetDef |
Riser Lug Offset Def |
No |
Standard |
No |
Yes |
RiserLugRotation |
Riser Lug Rotation |
Yes |
Dimensions |
Yes |
No |
RiserLugRotationRule |
Riser Lug Rotation Rule |
No |
Standard |
No |
Yes |
RiserLugLength |
Riser Lug Length |
No |
Standard |
No |
Yes |
RiserLugLengthRule |
Riser Lug Length Rule |
No |
Standard |
No |
Yes |
RiserLugHeight |
Riser Lug Height |
Yes |
Dimensions |
Yes |
No |
RiserLugHeightRule |
Riser Lug Height Rule |
No |
Standard |
No |
Yes |
Attribute Name |
Description |
Implementation Details |
---|---|---|
IJUAhs_RiserLugQty:: |
Specifies the number of riser lugs to be included in the support. |
The value must be an integer. |
IJUAhs_RiserLugQtyRl:: RiserLugQtyRule |
Specifies the hgrSupportRule that returns the number of riser lugs to be used in the support. The hanger rule must be the name of an existing rule in the catalog. To select the part number using RiserLugQty, do not specify any value for this property. |
For example: Rule Name: RiserLugQtyByPipeDia Rule ProgID: HS_S3DRules.RiserLugQtyByPipeDia |
IJUAhs_RiserLugOffset:: RiserLugOffset |
Specifies the offset for the riser lug. If a clamp is available, the software bases the offset on the clamp position. If a clamp is not available, the software offsets other parts depending on the riser lug position. |
The default units are specified in the CustomInterfaces worksheet of the HS_S3DAssy workbook; otherwise, specify the units. For example, 200, 200mm, 250in. |
IJUAhs_RiserLugOffsetRl:: RiserLugOffsetRule |
Specifies the hgrSupportRule that returns the offset for the riser lug The hanger rule must be the name of an existing rule in the catalog. To select the part number using RiserLugOffset, do not specify any value for this property. |
For example: Rule Name: RiserLugOffsetByPipeDia Rule ProgID: HS_S3DRules.RiserLugOffsetByPipeDia |
IJUAhs_RiserLugOffsetDef:: RiserLugOffsetDef |
Defines the riser lug offset and determines how to measure the attachment. If you set a value for RiserLugOffset but do not specify a definition, the software displays an error message. |
1 - Offset from center If clamp is available: If a clamp is not available: 2 - Offset bottom of riser lug from lower edge of clamp 2 - Offset top of riser lug from upper edge of clamp |
IJUAhs_RiserLugRot:: RiserLugRotation |
Specifies the angle of rotation for the riser lug around the pipe from the default placement position. |
The default units are specified in the CustomInterfaces worksheet of the HS_S3DAssy workbook; otherwise, specify the units. For example, 100 deg, 200 rad. |
IJUAhs_RiserLugRotRl:: RiserLugRotationRule |
Specifies the hgrSupportRule that returns the angle of rotation for riser lug. The hanger rule must be the name of an existing rule in the catalog. To select the part number using RiserLugRotation, do not specify any value for this property. |
For example: Rule Name: RiserLugRotationBySize Rule ProgID: HS_S3DRules.RiserLugRotationBySize |
IJUAhs_RiserLugLen:: RiserLugLength |
Specifies the length of the riser lug. |
The default units are specified in the CustomInterfaces worksheet of the HS_S3DAssy workbook, else specify the units. For example, 100 deg, 200 rad. RiserLug changes only the length of the vertical plate. Shoe changes the length of the shoe. |
IJUAhs_RiserLugLenRl:: RiserLugLengthRule |
Specifies the hgrSupportRule that returns the length of the riser lug. The hanger rule must be the name of an existing rule in the catalog. To select the part number using RiserLugLength, do not specify any value for this property. |
For example: Rule Name: RiserLugLengthBySize Rule ProgID: HS_S3DRules.RiserLugLengthBySize |
IJUAhs_RiserLugHeight:: RiserLugHeight |
Specifies the height of the riser lug. |
The default units are specified in the CustomInterfaces worksheet of the HS_S3DAssy workbook; otherwise specify the units. For example, 100 deg, 200 rad. RiserLug changes only the height of the vertical plate. Shoe changes the length of the shoe. |
IJUAhs_RiserLugHeightRl:: RiserLugHeightRule |
Specifies the hgrSupportRule that returns the height of the riser lug. The hanger rule must be the name of an existing rule in the catalog. To select the part number using RiserLugHeight, do not specify any value for this property. |
For example: Rule Name: RiserLugHeightBySize Rule ProgID: HS_S3DRules.RiserLugHeightBySize |