The following attributes define the Base Spring data driven assembly used to form the Base Spring support. For more information on how to use the attributes, see Part Specifications.
Name |
User Name |
Category |
On Property Page |
Read Only |
---|---|---|---|---|
VariableSpringPart ConstantSpringPart |
Variable Spring Part Number Constant Spring Part Number |
Standard |
Yes |
Yes |
SpringSize |
Spring Size |
Standard |
Yes |
No |
SpringRule |
Spring Rule |
Standard |
No |
Yes |
SpringQty |
Spring Quantity |
Standard |
Yes |
No |
TopPart |
Top Part |
Standard |
No |
Yes |
TopPartRule |
Top Part Rule |
Standard |
No |
Yes |
BottomPart |
Bottom Part |
Standard |
No |
Yes |
BottomPartRule |
Bottom Part Rule |
Standard |
No |
Yes |
TopSlidePlatePart |
Top Slide Plate Part |
Standard |
No |
Yes |
TopSlidePlatePartRule |
Top Slide Plate Part Rule |
Standard |
No |
Yes |
BasePlatePart |
Base Plate Part |
Standard |
No |
Yes |
BasePlateRule |
Base Plate Part Rule |
Standard |
No |
Yes |
AnchorBoltPart |
Anchor Bolt Part |
Standard |
No |
Yes |
AnchorBoltRule |
Anchor Bolt Part Rule |
Standard |
No |
Yes |
GroutPart |
Grout Part |
Standard |
No |
Yes |
GroutRule |
Grout Part Rule |
Standard |
No |
Yes |
Attribute Name |
Description |
Implementation Details |
---|---|---|
IJUAHgrRH_Variable IJUAHgrRH_Constant |
Specifies the part class of the spring to be used by the support. Use either the constant spring or the variable spring attributes. |
The codelist values must be available in hsVariableSpringPart or the hsConstantSpringPart worksheets. |
IJUAhsSpringRule:: |
Specifies the rule for selecting the spring part. |
If you specify a value for the spring, the software selects the spring using a rule. |
IJUAhsSpringQty:: |
Specifies the quantity of springs used. |
Specify either 1 or 2. If you do not specify a value, the software assigns the default value. |
IJUAhsTopPart::TopPart |
Specifies the top part of the spring that is used to attach to the pipe. |
The top part is optional. You can specify the following values: 1 - Pipe Clamp (Riser) 2 - Riser Lug 3 - Dummy leg 4 - Shoe |
IJUAhsTopPartRl:: |
Specifies the rule for selecting the top part of the base spring. |
If you specify a value for the top part, the software selects the top part using a rule. |
IJUAhsTopPartRl::TopPartRule |
Specifies the rule for selecting the top part of the base spring. |
If you specify a value for the top part, the software selects the top part using a rule. |
IJUAhsBottomPart::BottomPart |
Specifies the bottom part used to attach to the structure, and the bottom part is located below the spring. |
The bottom part is optional. Possible SmartParts: 1 – Dummy Leg / Stanchion |
IJUAhsBottomPartRl::BottomPartRule |
Specifies a rule for selecting the bottom part. |
If there is a value for this the bottom part will be selected by rule. |
IJUAhsTopSlidePlatePart::TopSlidePlatePart |
Specifies the top slide plate part used to attach to the spring, and the slide plate part is located between the spring and bottom part. |
The top slide plate part is optional. Possible SmartParts: 1 – Slide Plate |
IJUAhsTopSlidePlatePartRl::TopSlidePlatePartRule |
Specifies a rule for selecting the top slide plate part. |
If there is a value for this the top slide plate part will be selected by rule. |
IJUAhsBasePltPt:: BasePlatePart |
The Part-Number or Part Class of a base plate part to use for the support. The part must be one of: - a Plate SmartPart If you intend to select the Part-Number using the BasePlateRule, then this attribute should be left blank |
Option 1 – Specify a Part-Number or Part Class directly Option 2 – Use a HgrRule to get the Part The base plate part is an optional part. Leave these attributes blank if you do not want to include a base plate |
IJUAhsBasePltRl:: BasePlateRule |
An HgrSupportRule that returns a base plate Part-Number. The Hanger Rule should be present in the catalog; it can be the name of a rule, or a rule ProgID. If you intend to specify a Part-Number directly using BasePlatePart, then this attribute should be left blank. |
|
IJUAhsAnchorBltPt:: AnchorBoltPart |
The Part-Number or Part Class of an anchor bolt part to use for the support. The part must be one of: - a Rod SmartPart If you intend to select the Part-Number using the AnchorBoltRule, then this attribute should be left blank |
Option 1 – Specify a Part-Number or Part Class directly Option 2 – Use a HgrRule to get the Part The anchor bolt part is an optional part. Leave these attributes blank if you do not want to include an anchor bolt part. If an Anchor Bolt part is specified then the support will automatically include 4 of the bolts. |
IJUAhsAnchorBltRl:: AnchorBoltRule |
An HgrSupportRule that returns an anchor bolt Part-Number. The Hanger Rule should be present in the catalog; it can be the name of a rule, or a rule ProgID. If you intend to specify a Part-Number directly using AnchorBoltPart, then this attribute should be left blank. |
|
IJUAhsGroutPt:: GroutPart |
The Part-Number or Part Class of a grout part to use for the support. The part must be one of: - a Grout SmartPart If you intend to select the Part-Number using the GroutRule, then this attribute should be left blank. |
Option 1 – Specify a Part-Number or Part Class directly Option 2 – Use a HgrRule to get the Part The grout part is an optional part. Leave these attributes blank if you do not want to include a grout part. |
IJUAhsGroutRl:: GroutRule |
An HgrSupportRule that returns a grout Part-Number. The Hanger Rule should be present in the catalog; it can be the name of a rule, or a rule ProgID. If you intend to specify a Part-Number directly using GroutPart, then this attribute should be left blank. |