The following attributes define the combined riser data driven assembly:
Name |
User Name |
Category |
On Property Page |
Read Only |
---|---|---|---|---|
RiserSupport |
Riser Support |
Standard |
Yes |
Yes |
RiserSupportRl |
Riser Support Rule |
Standard |
No |
Yes |
GuideSupport |
Guide Support |
Standard |
Yes |
Yes |
GuideSupportRule |
Guide Support Rule |
Standard |
No |
Yes |
Attribute Name |
Description |
Implementation Details |
---|---|---|
IJUAhs_RiserSup:: |
Specifies the part number or the part class that will be used in a riser assembly |
Option 1 - Specify a part number or part class directly. Option 2 - Use RiserSupportRl to get the part. The following assembly ProgID type is supported: Riser |
IJUAhs_ClampRot:: ClampRotation |
Specifies the angle the clamp need to be rotated around pipe axis |
|
IJUAhs_RiserLugRot:: RiserLugRotation |
Specifies the angle that the RiserLug need to be rotated around pipe axis |
Option 1 - Specify an angle directly. Option 2 - Use RiserLugRotationRule to get the angle. |
IJUAhs_ShearLugRot:: ShearLugRotation |
Specifies the angle that the ShearLug need to be rotated around pipe axis |
Option 1 - Specify an angle directly. Option 2 - Use ShearLugRotationRule to get the angle. |
IJUAhs_ShearLugLen:: ShearLugLength |
Specifies the length of the ShearLug. This will be along pipe axis. |
Option 1 - Specify a length directly. Option 2 - Use ShearLugLenRule to get the length. |
IJUAhs_ShearLugThk:: ShearLugThk |
Specifies the thickness of the ShearLug. |
Option 1 - Specify a thickness directly. Option 2 - Use ShearLugThkRl to get the length. |
IJUAhsGuideSup:: |
Specifies the part number or the part class of the guide assembly to use with the support. |
Option 1 - Specify a part number or part class directly. Option 2 - Use GuideSupportRule to get the part. The following assembly ProgID types are supported: Guide HgrBeamGuide |
IJUAhsGuideX:: GuideOffsetX |
Specifies the offset for the Guide support along the X-axis. |
Option 1 - Specify a offset of Guide in X direction. Option 2 – Calculates the offset by progId of the support component. |
IJUAhsGuideShoeW:: ShoeWidth |
Specify a Shoe width directly. |
|
IJUAhsGuideGap::GuideGap |
Specify a Guide Gap directly. |
|
IJUAhs_RiserGuideRot::RiserGuideRotation |
Specify a Riser Guide Rotation directly. |
Option 1 - Specify a Riser Guide Rotation directly. Option 2 - Use RiserGuideRotationRule to get the rotation value. |
Welds
Individual secondary supports create welds based on their reference data. You do not have to specify weld data for the combined riser.
Drawing Dimensions
All the drawing dimensions for the Combined Riser support are from the Secondary Supports.