Change Toolbar - SmartSketch - Help

SmartSketch Help

Language
English
Product
SmartSketch
Search by Category
Help
SmartSketch Version
10.0(2018)

The Change toolbar contains commands that you can use to modify elements of your symbol. You can activate the Change toolbar by using the View > Toolbars command.

Moves an element or a select set in small increments. You use the Delta box on the Nudge ribbon to define the size of the increment, and then use the arrow keys to "nudge" the element or select set in the corresponding direction (left, right, up, and down).

Move - Moves elements from one location to another. For more information, see Move Command.

Nudge - Moves an element or a select set in small increments.

Offset - Draws an offset copy of an element or a set of contiguous elements. For more information, see Offset Command.

Place and Dimension Offset Graphics - Automatically dimension and place one or more chained or stacked lines that are offset from a selected line. For more information, see Place and Dimension Offset Graphics.

Rotate - Rotates one or more elements. For more information, see Rotate Command.

Mirror - Mirrors one or more selected elements about a line that you define. For more information, see Mirror Command.

Align - Allows you to align two or more elements in a selection set. For more information, see Align Command.

Scale - Reduces or enlarges selected elements by a scale factor that you define. For more information, see Scale Command.

Rectangular Pattern - Copies selected elements in a rectangular pattern. For more information, see Rectangular Pattern Command.

Circular Pattern - Arranges selected elements in a circular pattern. For more information, see Circular Pattern Command.

Delete - Deletes the selected element and any relationships and dimensions that have been placed on it. For more information, see Delete Command.

Bring to Front - Moves a selected element to the front of the display order. For more information, see Bring to Front Command.

Send to Back - Moves a selected element to the back of the display order. For more information, see Send to Back Command.

Pull Up - Moves a selected element up one position in the display order. For more information, see Pull Up Command.

Push Down - Moves a selected element down one position in the display order. For more information, see Push Down Command.

Group - Binds elements so that you can locate, select, and manipulate them as a unit. For more information, see Group Command.

UnGroup - Removes elements from groups that were defined using the Group command. For more information, see Ungroup Command.