Controls the print area of a selected sheet.
Scale
Controls the scale applied to the print area in a document.
Best Fit
Scales the selected drawing sheets or print area to fit the printer paper for the configured device.
Manual Scale
Specifies the scale value to apply to the print range during printing. For example, if the print range is a rectangle at 12 cm by 12 cm and you set a manual scale of 1:12, then the printed range appears as 1 cm by 1 cm on the printer paper.
If you want a 1:1 drawing of the current sheet scale, you can set the paper length to 1 and the design length to 1.
If you type values in the Paper Length and Design Length boxes, the red, blue, and black boxes in the Preview area change to reflect the values.
Paper Length
Specifies the paper length for the document you want to print.
Design Length
Specifies a design length.
Origin
Adjusts the location of the effective print area on the printer paper.
Center
Positions the print area center to the center of the printer paper. If you do not set this option, then the paper positions at bottom left to bottom left.
X origin
Sets a shift in the X direction from the origin.
Y origin
Sets a shift in the Y direction from the origin.
Preview
Displays the range of the graphic to print on the printer paper.
If you click Manual Scale and type values in the Paper Length and Design Length boxes, the red, blue, and black boxes change to reflect the values.