Draw Toolbar - SmartSketch - Help

SmartSketch Help

Language
English
Product
SmartSketch
Search by Category
Help
Smart Engineering Manager Version
11
SmartSketch Version
11.1

The Draw toolbar displays by default docked to the left side of the interface. You can use the commands on this toolbar to place the basic elements of your symbol.

Some commands on the Draw toolbar display fly-outs when you click and hold the command button. Fly-outs access commands that vary from but are closely associated with the original command that is displayed.

Select

Select Tool - Use to select, modify, and manipulate elements. For more information, see Select Tool.

SmartSelect

SmartSelect - Creates a select set by drawing a rectangular or polygonal fence around objects based on points that you define. For more information, see SmartSelect Command.

Line

Line/Arc Continuous - Draws one line or a series of connected lines. For more information, see Line/Arc Continuous Command.

Place Doubleline

Place Doubleline - Draws a doubleline or a series of connected doublelines. For more information, see Place Doubleline Command.

Connector

Connector - Connects two elements together. For more information, see Connector Command.

Tangent Arc

Tangent Arc - Draws an arc tangent or perpendicular to one or two elements. For more information, see Tangent Arc Command.

Arc by 3 Points

Arc by 3 Points - Draws an arc using three points. For more information, see Arc by 3 Points Command.

Arc By Center Point

Arc by Center Point - Draws an arc using three points. For more information, see Arc by Center Point Command.

Curve

Curve - Draws a smooth, open or closed curve. For more information, see Curve Command.

FreeForm

FreeForm - Draws freeform curves or splines. For more information, see FreeForm Command.

FreeSketch

FreeSketch - Draws lines, arcs, rectangles, and circles by converting a sketch into a precision drawing. For more information, see FreeSketch Command.

Circle by Center Point

Circle by Center Point - Draws a circle using a center point and radius. For more information, see Circle by Center Point Command.

Circle by 3 Points

Circle by 3 Points - Draws a circle using three points that define the circumference. For more information, see Circle by 3 Points Command.

Tangent Circle

Tangent Circle - Draws a circle tangent to one or two elements. For more information, see Tangent Circle Command.

Ellipse By Center

Ellipse by Center Point - Draws an ellipse using the center point and two edge points. For more information, see Ellipse by Center Point Command.

Ellipse By 3 Points

Ellipse by 3 Points - Draws an ellipse using three edge points. For more information, see Ellipse by 3 Points Command.

Rectangle

Rectangle - Draws a rectangle using three points. For more information, see Rectangle Command.

fillet

Fillet Rectangle - Draws a rectangle using four points and a user-specified radius. For more information, see Fillet Rectangle Command.

Polygon

Polygon - Draws an n-sided polygon based on user-defined properties. For more information, see Polygon Command.

Polygon By Center

Polygon by Center - Draws an n-sided polygon based on user-defined properties. For more information, see Polygon by Center Command.

Revision Cloud

Revision Cloud - Places a cloud around objects in a drawing. For more information, see Revision Cloud Command.

Point

Point - Draws a point. For more information, see Point Command.

Text Box

Text Box - Places a text box in a document. For more information, see Text Box Command.

Fillet

Fillet - Draws a fillet between two elements. For more information, see Fillet Command.

Chamfer

Chamfer - Draws a chamfer, or bevel. For more information, see Chamfer Command.

Trim

Trim - Trims open and closed elements to the closest intersection in both directions. For more information, see Trim Command.

Trim Corner

Trim Corner - Draws a corner by extending or trimming two selected open elements. For more information, see Trim Corner Command.

Trim to Element

Trim to Element - Trims the selected element to another selected element. For more information, see Trim to Element Command.

Trim to Point

Trim to Point - Trims the selected element to a point in space. For more information, see Trim to Point Command.

Trim Inside

Trim Inside - Trims within the selected element (partial delete). For more information, see Trim Inside Command.

Extend to Next

Extend to Next - Extends one or more open elements until they intersect with the nearest element. For more information, see Extend to Next Command.

Extend to Point

Extend to Point - Extends one or more open elements to a point in space or to another element. For more information, see Extend to Point Command.

Fill

Fill - Places a solid color or pattern inside a closed boundary. For more information, see Fill Command.

Mask

Mask - Masks out underlying graphics without deleting or trimming. For more information, see Mask Command.