-
In the SmartSketch Drawing Editor parent command, select one or more profile stiffeners or members that intersect the sketching plane using the Add Intersecting Item or Add Projection Item options.
-
If the StructTopology toolbar is not visible, click Tools > Toolbars, select StructTopology, and click OK.
-
Click Point at Offset from Keypoint .
The Point at Offset from Keypoint toolbar appears.
-
Select a profile cross-section.
Key points for the cross-section appear on the part geometry.
Profile stiffener example:
Member example:
-
Select a key point.
-
Type u and v values to offset the new point from the offset point.
-
Click Finish.
The new point is created. Driven dimensions also appear.
Profile stiffener example:
Member example:
-
If additional points are needed, click Point at Offset from Keypoint again, and repeat the previous steps.
-
Draw the needed geometry using the geometric construction points as constraints. You can also use other constraints, such as dimensions, as needed.
-
Click Finish (in the top left corner of the 2D window) to close the 2D environment and return to the SmartSketch Drawing Editor parent command.
A new geometric construction point is displayed in the 3D graphic view. This point can be used like other geometric construction.
After creating an object, such as a plate system, bracket, or opening, using geometric construction points, you can select a point directly in the 3D graphic view or Workspace Explorer and edit it. A separate ribbon displays for the point. For more information, see Geometric Construction Ribbon in Geometric Constructions in the Molded Forms User's Guide.