Create a Customized Spec Page - Intergraph Smart Instrumentation - Training - Intergraph Process, Power & Marine Documentation

SmartPlant InstrumentationTutorial

Language
English
Product
Intergraph Smart Instrumentation
Search by Category
Training
Smart Instrumentation Version
2016 SP1 (11.0.1)
Smart Instrumentation Web Version
(none)

You will now customize a new page called Modified Flow Element, change and move some headers and their associated data fields. You will switch the location of two fields: Line Size and Line Schedule.

  1. On the module toolbar, click to open the Page Editor.

  2. On the Page Editor module toolbar, click (Open Page).

  3. On the Select Specification Page dialog box, in the Find page box, type Orifice.

  4. In the Specification Page column, select the Orifice Plate page and click OK.

  5. On the module toolbar, click (Edit) to open the Edit Fields and Headers toolbar on the right.

  6. On the specification page, double-click the Line Size header to open the Edit Text dialog box.

  7. In the Text string box, type Line Schedule over the displayed field header.

    The dialog box should appear as shown:

  8. Click OK.

  9. Repeat steps 6 through 8 to swap the text of the Line Size and Line Schedule headers.

  10. Swap the positions of the data fields belonging to Line Size and Line Schedule as follows:

    1. On the Edit Fields and Headers toolbar, click (View Names).

    2. Click the line_size field.

    3. On the Edit Fields and Headers toolbar, click (Position) to display the pop-up window showing the position of the line_size data field.

    4. Make a note of the field position values.

    5. Select the line_sched data field and click (Position) to display the field position values.

    6. Make a note of the X,Y values.

    7. Select the line_sched data field and drag away from its original position so that the original position becomes vacant.

    8. Drag the line_uom data field to the right of the line_size data field.

    9. Select the line_size field again and display the Field or Header Position pop-up window.

    10. In the pop-up window, in the X box type 2423.

    11. Select the line_sched field.

    12. In the pop-up window, type the former line_size value for X (1627). Verify that the value of Y is 188.

    13. Select the line_uom field.

    14. In the pop-up window, type 2810 as the value for line_uom X. Verify that the value of Y is 188.

  11. When done, click (Position) again to close the Field or Header Position pop-up window.

    The modified field positions should appear as shown:

    All the above steps of moving fields around can be accomplished when the mouse hovers over a field, to display a + , which enables dragging.

  12. On the Page Editor toolbar, click (Edit) to exit the edit mode and close the Edit Fields and Headers side toolbar.

  13. On the Page Editor toolbar, click (Save as Page) on the module toolbar to save the modified page as a new page.

  14. On the Save as Page dialog box, click New to open the Page Definition Properties window, and then type the new page name as shown.

  15. Click OK to create the new page.

  16. Click OK to close the Save as Page dialog box.

  17. Close the Page Editor.