Define the FT (D/P Type Flow Transmitter) Instrument Type Profile - Intergraph Smart Instrumentation - Training - Intergraph Process, Power & Marine Documentation

SmartPlant InstrumentationTutorial

Language
English
Product
Intergraph Smart Instrumentation
Search by Category
Training
Smart Instrumentation Version
2016 SP1 (11.0.1)
Smart Instrumentation Web Version
(none)

After completing this procedure, when you create a flow transmitter later, the software will apply the instrument type profile settings and automatically create a two-terminal field device with two wires connected to it.

  1. Make sure that the Instrument Index module is open.

  2. Click Tables > Instrument Types.

  3. From the Process function list, select Flow.

  4. Scroll down the Instrument Type list and select instrument type FT (with description D/P Type Flow Transmitter) which you defined in a previous task.

  5. Click Profile to open the Instrument Type Profile dialog box.

  6. On the General tab, do the following:

    1. In the Instrument specifications group box, select Include instrument specification.

    2. From the Specification form list, select Diff. Pressure Instr. (flow) 56.

    3. In the Hook-ups group box, select Include hook-ups and Include in BOM.

    4. In the I/O type group box, select Include I/O type and from the list, select AI.

    5. In the Location group box, select Include location and from the list, select Field.

      The General tab of the Instrument Type Profile dialog box should now appear as shown:

  7. Click Apply.

  8. Click the Wiring and Control System tab.

    The parameters you will enter on this tab are based on the assumption that the device panel to be created will be a two-terminal field device with two wires connected to it.

  9. Do the following to define basic parameters and select a reference device panel for tags that you will base on this instrument type:

    1. Select Include wiring and Control system.

    2. From the Reference device panel list, select REF FIELD DEVICE 2-WIRE.

  10. Do the following to select the reference device cable and its connections:

    1. In the Conventional connections group box, click New.

    2. On the Conventional Connection Properties dialog box, from the Reference cable list, select 1P#20 BK, WH I/S.

    3. From the Cable set list, select PR #1.

    4. Accept the default selection of Apply to subsequent cable sets.

    5. From the Terminal strip list, select TS - 1.

    6. From the Starting terminal list, select +.

    7. From the Connection type list, select 2 In a row.

    8. Accept the default selection of Propagate tag signal.

      The Conventional Connection Properties dialog box should now appear as shown:

    9. Click OK to save your values and close the Conventional Connection Properties dialog box.

      The Wiring and Control System tab of the Instrument Type Profile dialog box should now appear as shown:

  11. Click OK to return to the Instrument Types dialog box.

  12. Click Apply.