Installing the Software for SmartPlant Instrumentation - Intergraph Smart Instrumentation - Installation & Upgrade - Hexagon PPM

SmartPlant Instrumentation Installation and Upgrade Guide
Language
English
Product
Intergraph Smart Instrumentation
Search by Category
Installation & Upgrade
Smart Instrumentation Version
2016 SP1 (11.0.1)

This guide describes the requirements needed to install SmartPlant Instrumentation and its supporting software, the different types of set up depending on type of database and environment, and how to connect the software to your database.  Before you begin installing the software, verify that the computers on which the software components will be installed meet the requirements described in Hardware and Software Recommendations.

The following flowchart shows the steps required to install the SmartPlant Instrumentation software and perform the initial administration tasks prior to opening SmartPlant Instrumentation for the first time.

SHARED Tip Hover the mouse pointer over a process and click to open the appropriate topic in the help.

2016SP1 Open Smart Instrumentation Administration Report management Open Smart Instrumentation Copying data Clearing locking Audit trail data Add-Ins Preferences management Naming conventions Access rights User groups Owner operator domains (As-Built/Projects) Plant design and structure Report Generation Activity Tracking Accounting, Contractors, and Clients Users, Departments, and Groups Database security and maintenance Backup and deletion Domain management Domain initialization Prerequisites required before opening Smart Instrumentation Connect to database Silent installation Upgrade from previous version Clean (new) installation Install Smart Instrumentation Update Check hardware/software compatibility Upgrade Check prerequisites

If you are working with IDEAL, you must install SmartPlant Instrumentation Server, which requires a special serial number.  For installation details, see the SmartPlant Instrumentation Server and IDEAL Installation and Configuration Guide.

Third Party Software Installation

Third party software such as CAD package and report generator such as InfoMaker can be installed at any location on the network or local stations.  The drives (local or network mapped) on which these packages are installed require read/write access for the stations that are configured to use them.

The driver used for printing the PDF files is included in the SmartPlant Instrumentation installation. This printer is used for PDF generation and should not be removed or used for any other purpose.

Versions of SmartPlant Instrumentation prior to version 2009 Service Pack 2 must first be upgraded to SmartPlant Instrumentation 2009 Service Pack 2.

After the upgrade is completed to version 2009 Service Pack 2 you must:

  1. Rebuild stored procedures and triggers for all domains.

  2. Rebuild projects in As-Built domains.

After completing the upgrade to Service Pack 2, you can then upgrade to your new version of SmartPlant Instrumentation.

Customer Support
Hexagon PPM Policy Against Software Piracy
Copyright © 1995-2017 Hexagon AB and/or its subsidiaries and affiliates
Version 2016 SP1 (11.00.01)
Published 7/5/2021 at 12:25 AM