Lists the attributes available for the pipeline.
Double-click an attribute name to add it to the Report Layout area. Alternatively, click Add Attribute . Then use the options in the Report Definition panel to configure the report as needed. For more information, see Define the report layout.
Not all of the pipeline attributes listed in the table below are permissible for all report types. As such, the report that is currently active in the Report Definition panel determines which pipeline attributes appear in the attributes list.
To make a report active, select the report type tab in the Report Definition panel.
Attribute Name |
Description |
-7 |
Record identifier for spool prefix/number. |
ATTRIBUTE0 to |
User-specified general purpose pipeline attribute that can be output in reports or plotted on drawings. Up to 200 attributes can be defined and can be used for any purpose. |
BATCH |
Section of the plant or project. |
Batch/Area |
Section of the plant or project. Batch and Area can be used interchangeably. |
Client-Drawing- |
User-specified string used to identify/track/control each individual drawing without using the usual pipeline reference or sheet number identification. Typically, this attribute is output on spool isometric drawings. |
Date |
Date associated with the pipeline. |
DRG |
Sheet number of the isometric drawing. |
Insulation Specification |
Default insulation specification. |
Jacket-Spec |
Default piping specification for the components in the pipeline that form part of the jacket. |
Misc-Spec1 to |
User-specified specification references that can hold additional, arbitrary data. Up to 5 miscellaneous specification references can be defined. |
Name |
User-specified identifier for the pipeline. |
Nominal Class |
Pipeline design class. |
Nominal-Rating |
Pressure rating of the pipeline. |
Painting |
Default painting specification. |
Piping |
Primary specification to which the pipeline belongs. |
Pipeline Reference |
Line reference or ID of the pipeline. |
Pipeline Temp |
Pipeline operating temperature. |
Pipeline-Type |
Type of pipeline construction. |
Pipeline-Drawing- Sequence |
User-specified text string used to identify/track/control each individual drawing without using the pipeline reference. |
Project Identifier |
Project number or name. |
Revision Number |
Revision identifier for the pipeline. |
Specific-Gravity |
Specific gravity of the pipeline contents. |
Spool-Naming-Rule |
Text string that specifies the spool prefix, type of identifier (alpha or numeric), and the length of the spool identifier. |
Spool-Prefix |
String used when creating spool identifiers. |
Support-Weld- |
Prefix used to identify erection pipe support welds. |
Support-Weld- |
Prefix used to identify fabrication pipe support welds. |
Support-Weld- |
Prefix used to identify offshore pipe support welds. |
Tracing Specification |
Default tracing specification reference. |
Weld-Prefix- |
Prefix used to identify all erection welds. |
Weld-Prefix- Fabrication |
Prefix used to identify all fabrication welds. |
Weld-Prefix-General |
String that Isogen uses to override the default weld number prefix for the pipeline. |
Weld-Prefix- |
Prefix used to identify all offshore welds. |