Alternative Texts - Isogen - Reference

Isogen Isometric Drawing Options Reference

Language
English
Product
Isogen
Search by Category
Reference
Smart 3D Version
11 (2016)
Isogen Control Panel Version
2.0(2016)
Isogen Version
13.0(2016)

Where applicable, each AText description includes its respective default value. If a default value is not specified, the AText is normally left blank.

For each AText, three options are available:

  • <Default> uses the default AText value.

  • <Suppress> suppresses the AText value.

  • <Edit value> modifies the AText value with the user-specified entry.

The reference plane ATexts output the relative directions associated with reference planes. Where applicable, substitute the ^ character with the reference plane name. Substitute the ? character with the distance from the reference plane.

Sub Volume Label

Controls the output of sub-volume names at coordinate positions on the isometric drawing. The default value is VOL ?.

AText ID:

-398

? Value:

Sub-volume name

$ Supported:

Yes

X Relative Coordinate

Identifies the positive relative position in the E/W plane. The default value is ^+?.

AText ID:

-443

? Value:

Ref Plane/Coord

$ Supported:

Yes

-X Relative Coordinate

Identifies the negative relation position in the E/W plane. The default value is ^+?.

AText ID:

-444

? Value:

Ref Plane/Coord

$ Supported:

Yes

Y Relative Coordinate

Identifies the positive relative position in the N/S plane. The default value is ^+?.

AText ID:

-445

? Value:

Ref Plane/Coord

$ Supported:

Yes

-Y Relative Coordinate

Identifies the negative relative position in the N/S plane. The default value is ^+?.

AText ID:

-446

? Value:

Ref Plane/Coord

$ Supported:

Yes

Z Relative Coordinate

Identifies the positive relative position in the U/D plane. The default value is ^+?.

AText ID:

-447

? Value:

Ref Plane/Coord

$ Supported:

Yes

-Z Relative Coordinate

Identifies the negative relative position in the U/D plane. The default value is ^+?.

AText ID:

-448

? Value:

Ref Plane/Coord

$ Supported:

Yes

Reference Plane Delimiter

An AText record has been assigned to be output as a delimiter between the relative direction and its relative position. AText set to blank only outputs the relative position. The default value is ^+?.

AText ID:

-449

? Value:

None

$ Supported:

No

Location Point Label

Indicates a location point position on the plotted isometric drawing. If more than one is included on any single isometric, a simple ID number is generated and output in the position indicated by the ? character. The default value is LOCATION-POINT?.

AText ID:

-471

? Value:

$ Supported:

Yes

Location Point Identifier

Outputs a location point ID number on the drawing frame. It is only output when multiple location points are included on a single isometric drawing. The default value is No.?.

AText ID:

-472

? Value:

Location Point ID

$ Supported:

Yes

Location Point of Label

Used as part of a location point position on the drawing frame. The default value is OF.

AText ID:

-473

? Value:

None

$ Supported:

No

Location Point Above Label

Used as part of a location point position on the drawing frame. The default value is ABOVE.

AText ID:

-474

? Value:

None

$ Supported:

No