Cut Pieces - Isogen - Reference

Isogen Isometric Drawing Options Reference

Language
English
Product
Isogen
Search by Category
Reference
Smart 3D Version
11 (2016)
Isogen Control Panel Version
2.0(2016)
Isogen Version
13.0(2016)

Defines properties for the cut list, which provides a list of pipes that are cut into smaller lengths during construction. You can also define the layout of the fixed and user-defined cut list formats and set options for the cut list summary file. Properties are also available for controlling cut length calculations.

If you are using ISOGEN Configuration with the current version of Smart 3D, cable tray and HVAC isometric drawing options are limited to beta access. As such, drawing options specific to cable tray and HVAC isometrics are not visible in ISOGEN Configuration by default. To turn on cable tray and HVAC options so that you have access to the full array of drawing settings when configuring Smart 3D isometric drawings, please contact PPM Smart Community.

The Cut Pieces category includes the style groups listed below.

  • Cut Length Calculations controls cut length calculations, such as setting the amount of extra pipe added for shop purposes or setting the amount of extra pipe added at loose flange and field weld positions for onshore and offshore piping. Properties are also available for calculating branch cut length and controlling the use of weld data. For more information, see Cut Length Calculations.

  • Drawing Cut List defines the content and format of the fixed and user-defined layouts of the cut list. For more information, see Drawing Cut List.

  • Reports controls the generation and content of the cut list summary file. For more information see Reports.