Pipeline properties - Intergraph Spoolgen - Help

Intergraph Spoolgen Help

Language
English
Product
Intergraph Spoolgen
Search by Category
Help
SmartPlant Foundation / SDx Version
10
I-Configure Version
6.0(2016)
Isogen Version
13.0(2016)
Smart Isometrics Version
7.2
Spoolgen Version
9.2

Any of the attributes listed below may display in the Properties window when you select a pipeline in the Pipeline Explorer or Graphics window.

The pipeline attributes that display in the Properties window and the ability to edit those attributes is controlled by I-Configure. For more information, see Project Defaults and Attributes in the I-Configure Help.

Alt Design Pressure

Specifies the alternative design pressure for the pipeline.

Alt Design Temperature

Specifies the alternative design temperature for the pipeline.

Batch/Area

Identifies a section of the plant or project to which the selected pipeline belongs. Batch and Area are used interchangeably.

Cleaning Requirement

Indicates the cleaning procedure to use after testing.

Construction Type

Specifies the construction status of the equipment, such as new, existing, future, demolish, and so on.

Construction Work Package

Specifies the construction work package to which the pipeline is assigned.

Date

Indicates the date associated with the pipeline.

Design Code

Specifies the pipeline design code.

Design Pressure

Specifies the allowable design pressure.

Design Temperature

Specifies the allowable design temperature.

Engineering Work Package

Specifies the engineering work package to which the pipeline is assigned.

Fluid Code

Indicates the type of fluid intended to flow through the pipeline.

Fluid Phase

Specifies the fluid type for the pipeline.

From

Specifies the start connection of the pipeline.

Handover Subsystem ID

Specifies a unique identification number for the handover subsystem.

Handover System ID

Specifies a unique identification number for the handover system.

Installation Work Package

Specifies the installation work package to which the pipeline is assigned.

Insulation Spec

Specifies the default insulation specification reference.

Insulation Spec Number

Specifies the identification code for the insulation specification associated with the pipeline.

Insulation Thickness

Specifies the width of the insulation from the internal surface of the pipeline to the external surface.

Jacket Spec

Specifies the default jacket specification reference.

Line ID

Specifies a unique identification code for the pipeline.

Main Nominal Size

Specifies the diameter of the main segment of the pipeline.

Material of Construction

Specifies the pipeline material of construction.

Misc Spec (1-5)

Provides for up to five miscellaneous specification references that can hold additional, arbitrary data.

NDT Requirement

Specifies the non-destructive test required for the pipeline.

Nominal Class

Identifies the pipeline design class.

Nominal Rating

Identifies the pressure rating of the pipeline.

Operating Pressure

Specifies the maximum operating pressure of the pipeline.

Operating Temperature

Specifies the maximum operating temperature of the pipeline.

Paint Colour

Defines the coating type for the pipeline.

Painting Spec

Specifies the default painting specification reference.

PID Drawing Number

Specifies the P&ID drawing number from which the pipeline originates.

PID Revision

Identifies the P&ID revision index.

Pipe Spec

Displays the default piping specification reference. This information is read-only.

Pipeline Attribute 0-199

Provides up to 200 user-specified general-purpose pipeline attributes that can be output in reports or plotted on isometric drawings.

Pipeline Reference

Specifies the name of the pipeline. If you type a new name, the software also displays the name in the Name box.

Pipeline Temp

Specifies the design or operating temperature for the pipeline.

Pipeline Type

Indicates the pipeline construction.

Procurement Work Package

Specifies the procurement work package to which the pipeline is assigned.

Project Identifier

Specifies the project number or name.

PWHT Requirement

Specifies the post weld heat treatment requirement for the pipeline.

Replot

Indicates whether there is a single isometric re-plot request. If you select True, the re-plot request is enabled. If you select False, the re-plot is disabled.

Revision

Specifies the revision identifier of the pipeline.

Sequence Number

Identifies an additional number used in situations where a third-party system, such as the Fabrication shop control system, automatically assigns a sequence number to the processed pipeline.

Specific Gravity

Specifies the specific gravity of pipeline contents.

Spool Prefix

Specifies the prefix that Isogen uses on spool identifiers.

Spool Naming Rule

Indicates the text string that specifies the spool prefix, type of identifier (alpha or numeric), and the length of the spool identifier.

Stress Category

Identifies the category for stress calculation.

Stress Package

Identifies the name assigned to the group of pipelines (package) that require stress analysis.

Support Weld Prefix (Erec)

Specifies the prefix string that the software uses for the identification of all erection pipe support welds.

Support Weld Prefix (Fab)

Specifies the prefix string that the software uses for the identification of all fabrication pipe support welds.

Support Weld Prefix (Offs)

Specifies the prefix string that the software uses for the identification of all offshore pipe support welds.

Test Medium

Identifies the type of fluid to use for the pipeline pressure test.

Test Pressure

Specifies the pressure to use for testing the pipeline for leaks or other failure.

To

Specifies the end connection of the pipeline.

Tracing Requirement

Indicates whether the pipeline requires heat testing.

Tracing Spec

Specifies the default tracing specification reference.

Weld Prefix (General)

Specifies the prefix string that the software uses for the identification of all welds.

Weld Prefix (Fab)

Specifies the prefix string that the software uses for the identification of all fabrication welds.

Weld Prefix (Erec)

Specifies the prefix string that the software uses for the identification of all erection welds.

Weld Prefix (Offs)

Specifies the prefix string that the software uses for the identification of all offshore welds.